My tiny single sided LM3886 PCB layout. :)

[sivan_and]

RZBL=2.7 OHMS/ 2Watts Carbon.
CZBL =100Kpf/100 Volts polyester.
Gud Luc

 

[DJ Exprice]

Sweet Boards I made from the schematic CHECK EM OUT!
I have the Eagle LM3886 boards, the Gerber Files,
some sweet PDFs, and a parts list (be sure to read that!.
Enjoy!



Here are the Files

 

[frank1]

PCB making

Russ, thanks very much for sharing this great design, also the method used to make PCB's.
My problem is, I want to print two or more images at a time to make a small number of boards. It would be great if I could copy and multiple images onto one page but the format is PDF so I can't do this.
Any ideas ?
Frank

 

[Bazukaz]

Hi,
You can print screen the images("Prn Sc" button). This saves the current screen to clipboard.
Or , use PDF to image converter program , and then use any painting software, like Paint.

Regards,
Lukas.

 

[richie00boy]

If you use print screen you will end up with a lower resolution printed image. Best would be to use software to convert the PDF into an image format such as PNG, GIF or BMP. Do not use JPG as that will make it horrid.

 

[Voltaic]

Sweet Boards I made from the schematic CHECK EM OUT!
I have the Eagle LM3886 boards, the Gerber Files,
some sweet PDFs, and a parts list (be sure to read that!.
Enjoy!



Here are the Files

Are these the same as the original Russ White boards, or something different? Either way, they're nicely done, I'm just curious.

cheers,
Daniel

 

[DJ Exprice]

The boards I made are based on Russ's Schematic. I give him full credit for the schematic. I just decided to make a more "organized and complex" board. His single sided one still better, because it's single sided All the better for Diy-ing at home (etch or single sided milling if you have a machine or are going to get one soon like me)

 

[Voltaic]

ahhh ok, do you happen to have the PDF's and/or gerbers for the single sided layout? the old link from russ is broken, and I'd like to give this one a shot, I just got 4 free LM3886's in the mail today.

cheers,
Daniel

 

[Russ White]

Hey guys sorry for the broken link. I will see if I can find the PDFs and repost them.

Cheers!
Russ

 

[Voltaic]

Excellent! cheers then mate.

 

[Russ White]

Link fixed

The link to the single side PCB PDFs has been fixed. I changed web servers and forgot to move some files.

In any case since I have received a few emails for them I figured I would repost the link.

Enjoy!

PDFs/Eagle files

Cheers!
Russ

 

[kuldeepsingh]

Not so tiny , but any comments

Hi all, any comments on this schematic..

 

[cb951303]

sorry to bring up an old thread but could OP repost the pcb layouts (if not removed intentionally).

 

[ratza]

If you need them to build up your own amp, you can use my design.

http://www.diyaudio.com/forums/showthread.php?postid=1570826#post1570826

 

[cb951303]

thanks, it's seems like a very slick design. Does the PCB made by OP have PSU onboard. I prefer the all-in-one solution

cheers