Snubber AND non-snubber ? Snubber AND non-snubber ? - Page 2 - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Snubber AND non-snubber ?
Snubber AND non-snubber ?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th December 2005, 07:49 AM   #11
Cortez is offline Cortez  Hungary
diyAudio Member
Cortez's Avatar
Join Date: Dec 2002
Location: Hungary ["Silicon Rectifiers" section]

Whats the standpoint about snubbers BEFORE the caps ?
A snubber always helps at high-freq to eliminate the local,
resonances created by the parasite inductances, and capacitances.
Before the caps:
Inductance come from the trafos secondary wires,
and capacitances from the rectifier diodes.
After the caps:
Inductances are comming from the caps internal "wires",
and capacitances are obvious.

I know, this was on focus earlier, but i dont remember to the
results, and these topics have a lot of pages...
So, shouldnt we apply snubbers before the caps, at the diodes,
like at the second link, based on the same cause whats in the first link ?
Where is it more important and effective ?
  Reply With Quote


Snubber AND non-snubber ?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Snubber caps atmars Tubes / Valves 2 15th November 2008 01:10 PM
snubber p.s. wicho Chip Amps 11 21st October 2008 01:07 PM
Calculation for Snubber Value xyz9915 Power Supplies 6 2nd March 2008 11:09 PM
Snubber for HEXFRED? pooge Solid State 3 29th July 2005 02:41 AM
Snubber s2kov Tubes / Valves 13 30th November 2004 02:09 PM

New To Site? Need Help?

All times are GMT. The time now is 10:50 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio