Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Which of these three digital amps for my line arrays?
Which of these three digital amps for my line arrays?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 2nd May 2005, 07:19 PM   #1
mazeroth is offline mazeroth  United States
diyAudio Member
Join Date: Jul 2004
Location: United States
Default Which of these three digital amps for my line arrays?

I'm finishing up a pair of line arrays that are 96db/1w efficient, so a lot of power is not a necessity. I am using a Behringer DCX2496 as my active crossover and will be needing 4 channels of amplification for my speakers. I currently own three Sonic Impact T-Amps (barely tested them) and a Panasonic XR-25. I was also considering the Teac AL700P 3-channel digital amp, using 2 channels of each (as many recommend disconnecting the center amp) and using two of them. Reason being they offer more power than my Sonic Impacts and supposedly have better bass reproduction.

Now, I have heard great things about the Panasonic XR-25 as a pure digital amp, but going from an analog source (DCX2496) to the Panasonic's digital amp I'm unsure of. The nice thing about using the XR-25 is I get 5 channels (only need 4) of amplification for the measly $120 I paid for it with shipping. The Teacs, on the other hand, look cooler but would run me $200+ for a pair of them. I'm not sure which would sound better in my situation. Lastly, I do have 3 Sonic Impact amps sitting here doing nothing. I hooked one of them up to my line arrays and it did provide "adequate" volume, but I did notice a loss of bass around 70hz and lower.

Anywho, if you were in my shoes which of these three would you be looking at?

  Reply With Quote
Old 2nd May 2005, 08:36 PM   #2
dwk123 is offline dwk123
diyAudio Member
Join Date: Feb 2002
Well, in theory I should be able to give an opinion, as I have all 3 amps mentioned, and I'm using a DCX as well. In practice....well, my system is in such flux that any opinion has to be seen as 'preliminary'.

I have modded my XR25 to run off battery power, and was originally using that on my mid/tweets. Sounded 'ok', but when I swapped in the Teac, wowza! MUCH better - more like what I expect to hear from the Panny when run digitally. I'm now thinking that the battery on the Panny might have been low, and if so the test wouldn't be too valid.

The SI imho isn't in the running unless you're looking at reasonable mods, although I haven't yet tried it in the 'main (under construction) rig'.

So, assuming that the $200 isn't a problem, AND you can actually find the Teac units (J&R stopped listing them), that's the quickest route to very good sound. I believe that the Panny would equal the Teac, but only if either modded and/or run digitally (which would mean mods to the DCX). I haven't done any mods to the SI units, so I don't know how good they can get - trying a modded SI would certainly be the cheapest way to go, and you can always change your mind later.

I'm hoping to be able to eval the Panny run via digital input vs the Teac driven by analog next weekend when I get my PC digital xover going.
  Reply With Quote
Old 2nd May 2005, 09:18 PM   #3
mazeroth is offline mazeroth  United States
diyAudio Member
Join Date: Jul 2004
Location: United States
Thanks for the input! I found a local guy (hour away) that has 2 of these in stock and said he should be getting 2-4 more in, and that may be it. Should I jump on these? I see them going for $190+ at some places on the net.

Also, what do you feel about Newform Research's review of the XR45 and the DCX2496? Do you feel their opinion is biased because they're selling a unit with these, or do you feel it's worthy of noting? One thing I do like about the Panasonic route is the volume control, and better yet, with a remote!


  Reply With Quote


Which of these three digital amps for my line arrays?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NSB line arrays for PA use? Spasticteapot PA Systems 1 1st April 2007 01:32 PM
chip amp for line arrays zhar Chip Amps 5 18th November 2006 06:48 AM
Do line arrays... LizardBrain Full Range 4 23rd March 2006 06:21 AM
Line Arrays Down Under deaf monkey Multi-Way 0 14th December 2004 07:03 PM
Line Arrays Won Multi-Way 33 10th February 2002 11:20 PM

New To Site? Need Help?

All times are GMT. The time now is 05:10 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio