Brian GT's snubber PCB

kestrel200 · 30th April 2005, 02:56 AM

Ok...i'm ignorant and can't find the answer.. On all of Brian's other PS boards he labled the AC inputs either AC1 H or AC1N but he changed that on the Snubber. Instead he put a line over one of the inputs. Is that suppose to indicate the Neutral????

Peter Daniel · 30th April 2005, 12:53 PM

Those markings have no actual meaning and it doesn't matter how you connect the wires as long as you go by AC1 - AC1, AC2-AC2.

If you look at the rectifier's bridge, you'll notice that no matter how the phase of secondaries is connected, it always goes through a set of two diodes to exactly same points.

30th April 2005, 02:56 AM	#1
kestrel200 diyAudio Member Join Date: Feb 2004 Location: Mt. Pleasant SC	Brian GT's snubber PCB Ok...i'm ignorant and can't find the answer.. On all of Brian's other PS boards he labled the AC inputs either AC1 H or AC1N but he changed that on the Snubber. Instead he put a line over one of the inputs. Is that suppose to indicate the Neutral????

30th April 2005, 12:53 PM	#2
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Those markings have no actual meaning and it doesn't matter how you connect the wires as long as you go by AC1 - AC1, AC2-AC2. If you look at the rectifier's bridge, you'll notice that no matter how the phase of secondaries is connected, it always goes through a set of two diodes to exactly same points. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
snubber p.s.	wicho	Chip Amps	11	21st October 2008 01:07 PM
Calculation for Snubber Value	xyz9915	Power Supplies	6	2nd March 2008 11:09 PM
Snubber AND non-snubber ?	jimbo1968	Chip Amps	10	6th December 2005 07:49 AM
Snubber	s2kov	Tubes / Valves	13	30th November 2004 02:09 PM
snubber cap question	wintermute	Parts	17	14th January 2004 09:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving