diyAudio - TO-220-11 library for expresspcb?

diyAudio (http://www.diyaudio.com/forums/)

- Chip Amps (http://www.diyaudio.com/forums/chip-amps/)

- - TO-220-11 library for expresspcb? (http://www.diyaudio.com/forums/chip-amps/44208-220-11-library-expresspcb.html)

rs1026

29th October 2004 08:03 PM

TO-220-11 library for expresspcb?

Does anyone have To-220-11 library(pcb component) for expresspcb.This is for a lm3886 chip. How to go about creating a pcb component for 3886 chip.Should I look at the data sheet pin distances adn then try to consturct the same by setting grid distances.

Can anyone tell me a simple way to do this.

Peter K

30th October 2004 03:18 PM

2 Attachment(s)

I have made the PCB component (LM3875) myself. I suppose this has the same sizes. You can take it from the attached ExpressPCB file and copy it into your PCB drawing. Hope this helps.

Peter K

rs1026

30th October 2004 07:00 PM

thanks

thanks Peter, that will definetly help.

pricinosus

8th February 2006 10:07 PM

I design TO220 (11Pins) component for ExpressPCB using National datasheet exact dimensions.

jackinnj

8th February 2006 10:32 PM

turn off "snap to grid" which may be set at 25 mils.

Leolabs

9th February 2006 12:37 AM

2 Attachment(s)

try this:

sivan_and

9th February 2006 05:12 AM

rs1026

And don't forget to post the completed PCB pics !!

pricinosus

13th February 2006 07:34 PM

2 Attachment(s)

I attached the file in my previous post but, now i see ... nothing :confused:

I reatach the file

All times are GMT. The time now is 02:25 PM.