LM3886 PCB by Elektor-Electronics UK

mhelin · 6th October 2004, 01:58 PM

Seems to be available, anybody built amp using this PCB?

No. 268 JULY/AUGUST 1998 100-watt single-IC amplifier 954083-1 PCB

http://www.elektor-electronics.co.uk...m?pcb=954083-1

carlmart · 6th October 2004, 08:03 PM

It's a nice pcb. For the comparison tests we did, between IGC and NIGC, the latter was a design using Elektor's pcb, although with Linkwitz suggested parts.

The IGC, which I designed, sounded much better.

Perhaps you would be better off using BrianGT's pcb, which is also NIGC but according to Peter Daniel sounds not so different from IGC.

Carlos

6th October 2004, 01:58 PM	#1
mhelin diyAudio Member Join Date: Apr 2003 Location: Tampere Finland Europe	LM3886 PCB by Elektor-Electronics UK Seems to be available, anybody built amp using this PCB? No. 268 JULY/AUGUST 1998 100-watt single-IC amplifier 954083-1 PCB http://www.elektor-electronics.co.uk...m?pcb=954083-1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Elektor Electronics: Audio DAC2000 w/PCM1704U-K!!!	cartman	Swap Meet	2	9th March 2011 05:10 AM
Elektor–OPT SS amp	Tyimo	Elektor	28	29th December 2010 08:56 AM
FS Build your own AUDIO VALVE AMPLIFIERS by Elektor Electronics	xtaltech	Swap Meet	6	4th January 2008 02:37 AM
Are two separate lm3886 = 2*lm3886 in parallel or bridge mode	rs1026	Chip Amps	11	21st October 2004 10:24 AM
Benchtop Power Supply from Elektor Electronics magazine	AudioFreak	Equipment & Tools	3	2nd May 2002 03:04 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th October 2004, 08:03 PM	#2
carlmart diyAudio Member Join Date: Mar 2001 Location: Brazil	It's a nice pcb. For the comparison tests we did, between IGC and NIGC, the latter was a design using Elektor's pcb, although with Linkwitz suggested parts. The IGC, which I designed, sounded much better. Perhaps you would be better off using BrianGT's pcb, which is also NIGC but according to Peter Daniel sounds not so different from IGC. Carlos

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)