Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Linkwitz-Riley Cross over question
Linkwitz-Riley Cross over question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th August 2004, 02:51 PM   #1
rs1026 is offline rs1026  India
diyAudio Member
Join Date: Jul 2004
Location: Bangalore
Smile Linkwitz-Riley Cross over question

I am planning to make a PCb for the circuit given in this Link.

I wanted to know if its possible to make a single sided PCb design for this filter. I tried a lot to fit on a single sided PCb but its very difficult.

Can anyone who has tried this help me out??
  Reply With Quote
Old 27th August 2004, 07:02 PM   #2
JensRasmussen is offline JensRasmussen  Denmark
diyAudio Member
JensRasmussen's Avatar
Join Date: Jul 2002
Location: Denmark - Jutland
Send a message via ICQ to JensRasmussen Send a message via MSN to JensRasmussen

It seems to me that Rod already made a single side PCB for this project. Why not support his design work and simply buy one or two of his PCBs depending on your configuration.

Making your own PCB is satisfying, but there is the risk that you will probably need more than one attempt to get it right and therefore might end up spending a lot of time and effort on making the PCB instead of listening and tweaking the filter.

I suggest you build it on breadboard or get Rods PCB. This will save you a lot of work, and speed up the project.

Good luck

  Reply With Quote
Old 27th August 2004, 10:15 PM   #3
karahara is offline karahara  Germany
diyAudio Member
Join Date: Dec 2003
Location: Germany - Bavaria
Send a message via ICQ to karahara

I've made single-sided PCBs, but it was not too difficult. I've seperatet in 3 pieces, one buffer and two filter sections.
In a few days i'll make them and then i'll see.

  Reply With Quote


Linkwitz-Riley Cross over questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Linkwitz-Riley Crossover questions MBrej Solid State 2 15th January 2009 01:19 PM
2 LM3876 plus 1 LM3886 using Linkwitz-Riley crossover baboon81 Chip Amps 2 4th March 2007 02:47 AM
A Challenge to Linkwitz-Riley ? jackinnj Multi-Way 17 15th March 2006 12:50 AM
Linkwitz Riley Filter Implementation Roysyboy Subwoofers 1 19th September 2005 04:40 AM
linkwitz-riley crossover arthur Solid State 0 28th April 2003 11:26 AM

New To Site? Need Help?

All times are GMT. The time now is 11:22 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio