I too believe in reading the datasheets
The influence of the resistor on the gain was what prompted me to ask the question as I realised that to ensure no attenuation, enough current must flow out the pin. I saw the best way to achieve the absolute least possible attenuation was to just omit the resistor and tie directly to -ve.
The influence of the resistor on the gain was what prompted me to ask the question as I realised that to ensure no attenuation, enough current must flow out the pin. I saw the best way to achieve the absolute least possible attenuation was to just omit the resistor and tie directly to -ve.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- LM3886 Mute