help needed to confirm part numbers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Are these the right part numbers for BrianGT NIGC?

caps...

Panasonic cap 1500uF EEU-FC1H152L Digi-Key Part Number P10334-ND

Panasonic cap 47uF EEU-FC1H4R7 Digi-Key Part Number P10315-ND

resistors, are these OK?

71-CCF55-20K CCF5520K0FKR36 Vishay/Dale 1/2W 1% Metal Film Resistors
1% 20K OHM 1/2W

71-RL20S-G-220/R RL20S221GRE5 Vishay/Dale 1/2W 1% Metal Film Resistors
220 OHM 2%
 
From BrianGT's Manual Q/A
5.4 I would rather start with basic components, what works with the board?

If you just want to use standard components, the board will work fine, and you can always upgrade later on. Here is a parts list for Digikey:
# Part Name/Description Digikey Part Number
2 LM3875TF LM3875TF-ND
4 1500uF 50v Panasonic FC Capacitor P10334-ND
4 22.1k ohm resistor (min quantity = 5) PPC22.1KXCT-ND
2 680 ohm resistor (min quantity = 10) P680BBCT-ND
2 220 ohm resistor (min quantity = 5) PPC20.0KXCT-ND
8 On Semiconductor MUR860 fast diodes MUR860OS-ND
2 4.7uF 50v Panasonic FC Capacitor P10315-ND

If you are just buying these components for yourself from Digikey, in small quantities, expect to pay about $35 for all these parts, plus shipping from Digikey. The budget kit will cost around $35, including all of the parts above and a PCB set.

Here's is each kits component lists.

2.1 Premium Kit Contents
Description Quantity
PCB containing board for 2 channels and 2 rectifiers 1
LM3875TF – National Semiconductor chip amplifier 2
1500uF 50v – Panasonic FC Capacitor 4
22k ohm – Caddock MK132 resistor (R2 and RNFB) 4
680 ohm – Riken Ohm 0.5w resistor (R3) 2
220 ohm – Caddock MK132 resistor (R1) 2
MUR860 – On Semiconductor fast diode 8
4.7uF 50v – Black Gate N-type capacitor 2

2.2 Basic Kit Contents
Description Quantity
PCB containing board for 2 channels and 2 rectifiers 1
LM3875TF - National Semiconductor chip amplifier 2
1500uF 50v - Panasonic FC Capacitor 4
22k ohm – Phoenix SFR16S resistor (R2 and RNFB) 4
680 ohm – Panasonic Carbon Film 0.5w resistor (R3) 2
220 ohm - Phoenix SFR16S resistor (R1) 2
MUR860 - On Semiconductor fast diode 8
4.7uF 100v – Panasonic FC capacitor 2

Phil
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.