LM3886 + PS PCB, anyone interested?

[squadra]

I'm going to order at least 15 copies of the pcb I have designed.
Each pcb can accomodate a single channel of a non-inverted lm3886 based amplifier, rectifier diodes & buffering caps for the ps.

The pcb will have 2 layers and the component layout will be printed on the top layer.
The size is 2" * 3.1" (50.4 * 78.74 mm).

Artwork: top, bottom.

If I order 15 the price is €11.70 a piece.
The price drops quickly, for 20 boards the price will be €9.45 a piece, and for 50 it is only €5.30 a piece (shipped to my door).

So, is anyone interested in getting a number of these pcbs?

[Leonidas]

Yes , I would be interested, at least when the price would go down to aprox. 6 euro each.
I could do with some help constructing them to,
........and i live in the Netherlands!!
At this moment I have 4 lm3886T and don't what to do with them.
Please keep me informed if you are close to 50 orders and need 4 more!!! I'll join the deal!!

Leonidas

p.s. will not be on the forum for the next 4 weeks!!

[jhead]

Don't know if it would matter to you to do a order to the U.S. but I would be in for 2

[VT67]

Hi Squadra

If you can manage to get enough orders so the price drops , ±5€ per PCB, you can count me in for 4 pieces.

Cheers

Walter

[squadra]

I'm not too patient, so I have already ordered 30 pcbs
Price /piece will be € 7.40, which is about USD 9.50 at the current rate.
They should arrive in 3 weeks, around the 12th to be more precise.

Originally posted by Leonidas
Yes , I would be interested, at least when the price would go down to aprox. 6 euro each.
I could do with some help constructing them to,
........and i live in the Netherlands!!
At this moment I have 4 lm3886T and don't what to do with them.
Please keep me informed if you are close to 50 orders and need 4 more!!! I'll join the deal!!

Leonidas

You decide if the €7.40 is close enough to €6 for your likings.
Would you require help with the smds?

Originally posted by jhead
Don't know if it would matter to you to do a order to the U.S. but I would be in for 2

I'm not having any problems with shipping to the US, but maybe the shipping costs could be higher than the value of the pcb's

Would anybody know what charges to expect for insured sending of 2 small pcbs?
I checked with ups and that would be around €45, so that's not an option.

If the shipping is too expensive I can always post the gerber files, although I would like to wait until the pcbs have arrived and verified that everything's OK.
(Never used this pcb design package (Laoy1), I hope what is sent to the pcb shop is what I think I've designed )

[Upupa Epops]

Get I one for free ?

[squadra]

Originally posted by Upupa Epops
Get I one for free ?

Scary stuff, about 1 second ago I sent you a message

[Upupa Epops]

To this time I don't get anything .

[Nuuk]

Would anybody know what charges to expect for insured sending of 2 small pcbs?

If the buyer accepts the risk, why insure the PCB's? Then you can send them for just a few dollars!

[squadra]

Originally posted by Upupa Epops
To this time I don't get anything .

I have enabled (and tested ) the email button in my profile,
could you send me a message, then I will send it again via normal email?

Originally posted by Nuuk


If the buyer accepts the risk, why insure the PCB's? Then you can send them for just a few dollars!

That is a possibility, that would be something like €5.
You are right in that the receiver can select the way it is sent, my bad.