a test job.
I hook up 3 single channel opamps to directly drive left, right, and ground channels, a la PPA. The initial design uses LM6171 opamps,It is a better choice for this configuration.the 3 access gain setting in 5,and including 10pf slow down caps in feed back loops of each chips.+18v power supply.all hook wire is pc cables,such as SCSI interlink cable.
I hook up 3 single channel opamps to directly drive left, right, and ground channels, a la PPA. The initial design uses LM6171 opamps,It is a better choice for this configuration.the 3 access gain setting in 5,and including 10pf slow down caps in feed back loops of each chips.+18v power supply.all hook wire is pc cables,such as SCSI interlink cable.
Attachments
thank you Philo
I like virtual ground mode too.in fact,I have use a 8dip tle2426 for the +/- rail power supply parts work.
this is the original sch file:http://elvencraft.com/downloads/minidiffsch.gif by morsel.
-digi
I like virtual ground mode too.in fact,I have use a 8dip tle2426 for the +/- rail power supply parts work.
this is the original sch file:http://elvencraft.com/downloads/minidiffsch.gif by morsel.
-digi
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.