diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Chip Amps (http://www.diyaudio.com/forums/chip-amps/)
-   -   Resistor values (http://www.diyaudio.com/forums/chip-amps/33478-resistor-values.html)

Stocker 4th May 2004 02:09 PM
Resistor values
 
2 Attachment(s)
This is figure 3 from National's LB-44. I have two questions:

the precision 20k resistors: why?

and the 56R resistors: they are for current limiting yes? to determine their minimum value, I am thinking I need to figure in the amp's max output current, the portion of the load that each amp drives, and the voltage that's going to be developed across the load. Correct?

/edit maybe I should attach the image what?

Frank Berry 4th May 2004 02:22 PM
The 20k resistors set IC A3 at unity gain.
The value of the two resistors isn't that critical but the resistors must be matched.

Stocker 4th May 2004 02:26 PM
thank you.

peranders 4th May 2004 03:10 PM
Quote:
Originally posted by Frank Berry
The value of the two resistors isn't that critical but the resistors must be matched.
It isn't necessary with matching, 5% will do, 1% is better. Even 10% is OK!


All times are GMT. The time now is 06:36 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio