IGC with High input impedance! - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th April 2004, 05:03 PM   #1
GregGC is offline GregGC  Canada
diyAudio Member
 
Join Date: Oct 2003
Location: Toronto
Lightbulb IGC with High input impedance!

IGC with High input impedance!

For the ones that need higher input impedance and like the Inverted topology thatís what I came up with. Itís a popular way to control the gain of an opamp, but I havenít seen it applied in the IGC.

The shown sch has input impedance of 47k but you can go to 100k if you need to by changing R4. Youíd need to change the two 220k res to 470k so that the gain stays the same. The AC gain is ~ (R2/R4)*(R6/R5). So you can play with the values, though try to keep R6/R5 as low as possible because the same two resistors determine the DC gain of the amp. The lower the DC gain, the lower the Output offset. Also to keep the offset low (single digit mVís) keep R1 and R2 the same value (1% tolerance if possible). On the other hand R1 and R2 shouldnít be more than 470k (noise susceptibility).

/Greg
Attached Images
File Type: jpg gregs hi z igc.jpg (49.0 KB, 187 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
High input impedance X circuit zelter Pass Labs 4 31st March 2009 10:06 PM
Tuning 604 Project - High Q and High Output Impedance? Seadweller Multi-Way 20 18th February 2008 07:49 PM
Low amp Impedance input and high dac output tulip Tubes / Valves 1 30th November 2007 08:24 PM
How high is the input impedance of 'a' jfet transistor? Hans L Parts 2 14th September 2006 02:49 PM
P3A question: high input impedance sobazz Solid State 1 14th July 2003 05:45 AM


New To Site? Need Help?

All times are GMT. The time now is 10:37 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2