In lieu of a soft start circuit such as Rod Elliots with the X2 cap, diodes, and 5w resistors is this a viable alternative?
Add a 2nd power switch. Main power switch applies power to transformer and rectifier board/caps and the 2nd switch would control VCC and VEE between amp board and rectifier board w/supply caps DC out..or should the 2nd switch be placed between the transfo secondaries and bridge rectifier..thanks!
Add a 2nd power switch. Main power switch applies power to transformer and rectifier board/caps and the 2nd switch would control VCC and VEE between amp board and rectifier board w/supply caps DC out..or should the 2nd switch be placed between the transfo secondaries and bridge rectifier..thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.