Try the ground connection with no RC network first, you may not need it and it reduces safety. In my stereo GCs, I usually connect both amp grounds together and run them to the input connectors and connect to chassis ground there. This is one method of reducing ground loops.
pinkmouse said:Try the ground connection with no RC network first, you may not need it and it reduces safety. In my stereo GCs, I usually connect both amp grounds together and run them to the input connectors and connect to chassis ground there. This is one method of reducing ground loops.
My GC doesn't have AC ground, cause AC ground is normally not used in households my country, except for computer installations etc.
So does safety become an issue here then...?
/Jan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.