15 CHANNEL DISRTRIBUTION STEREO AMPLIFIER - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th April 2013, 09:31 AM   #1
diyAudio Member
 
Join Date: Apr 2013
Smile 15 CHANNEL DISRTRIBUTION STEREO AMPLIFIER

I am not a professional, have only very basic knowledge and still trying to build a 15 CHANNEL DISTRIBUTION STEREO AMPLIFIER + 15 CHANNEL POWER STEREO AMPLIFIER to distribute music signal from CD, Radio, TV or Computer to 15 different locations around my house.
On the Internet I found a schematic that was called “Stereo Distribution Amplifier Module E-234” (see the attachment). They use DUAL LOW-NOISE OPERATIONAL AMPLIFIERS NE5532 and the schematic splits 1 stereo input to 6 stereo outputs. I want to split 1 stereo input to 15 stereo outputs by adding another 9 stereo outputs (I do not need the MONO option).CAN ANYONE TELL IF THIS IS GOING TO WORK?
Talking about 15 CHANNEL POWER STEREO AMPLIFIER -- On Ebay there is a “6 X 100W Class D Audio Amplifier Combo Kit w 36V 350W Power Supply TDA7498” for around $80. This board has 3 independent stereo amplifiers in it. So, for 15-channel power stereo amplifier I would need 5 of these kits.
Attached Files
File Type: pdf Module E-234 Stereo Distribution Amplifier.pdf (511.5 KB, 76 views)
  Reply With Quote
Old 6th April 2013, 10:09 AM   #2
diyAudio Member
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
Send a message via Skype™ to JonSnell Electronic
The module your are looking at is specifically designed for balanced line commercial audio and stage work.
Not needed and far too complicated.
If you build an amplifier, with controls, per zone and mount them in each zone and then build a stereo to 15 channel stereo output mixer, use screened lead to each zone and you will not need the heavy speaker cables everywhere! If you ustilise the same E234 circuit and not use the B amplifiers, it will be unbalanced and just what you need.

Last edited by JonSnell Electronic; 6th April 2013 at 10:10 AM. Reason: Spelling ... again!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hafler DH220 Stereo Mono Power Amplifier For Parts Or Spares Dead Left Channel Simbl Swap Meet 6 21st September 2012 06:32 PM
5v Usb 2.1 Channel Digital Audio Stereo Power Amplifier Board Module 5w+3w Bone Chip Amps 0 9th July 2012 05:35 PM
ATI 1502 two-channel stereo Power amplifier samalex Solid State 0 9th December 2011 02:19 AM
Stereo amplifier sqeals at idle, distorts on one channel? nac134 Solid State 16 31st December 2010 10:44 PM
LA4743B Car stereo BTL 4-channel (45 W x 4) power amplifier IC emuman100 Chip Amps 2 15th March 2004 06:21 AM


New To Site? Need Help?

All times are GMT. The time now is 08:09 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2