Suggestions for a simple Amp - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th November 2003, 07:40 PM   #1
TomJ is offline TomJ  United Kingdom
diyAudio Member
Join Date: Feb 2003
Location: Cambridge
Default Suggestions for a simple Amp

I would like a simple amp Design to practice with prefrebaly one that can be ran off of batterys(and i mean reasonable no's of batterys I.E. no more than 12volts) or a mains adaptor any designs would be appreciated.
  Reply With Quote
Old 17th November 2003, 09:09 PM   #2
ronc is offline ronc  United States
diyAudio Member
Join Date: Mar 2003
I have build IGC , batt (+/-)12 V with as little as 1 chip, 2 resistors and 1 cap, 2 batteries.Works better than you would think.
Feedback loop 250K/10K, cap is a 1uf between the power pins.Wire from pin 7 goes to signal ground.However you cant have any DC coming from the source.And without a ref. resistor to ground you have to have the source hooked up.
Simple and it works.
  Reply With Quote
Old 7th December 2003, 12:41 PM   #3
diyAudio Member
Join Date: Mar 2007
Try TDA 205x series simpler to use and low components.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Simple, SIMPLE Digital volume control -_nando-_ Digital Source 5 21st December 2006 02:20 PM
Simple fet amps schematics, suggestions? nikwal Solid State 0 3rd December 2006 10:51 AM
A simple question from a simple man. inteificio Solid State 5 17th October 2005 04:00 PM
Simple answer required for a simple question... rabbitz Multi-Way 4 31st August 2003 11:05 AM
simple preamp with e288cc suggestions Sjef Tubes / Valves 9 17th May 2003 12:43 AM

New To Site? Need Help?

All times are GMT. The time now is 12:34 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2