Request help to assemble a kit

[iinself]

Hi,
I purchased a TDA2050 kit on ebay. I am unable to figure out which resistor goes where on the PCB. The seller sure-electronics.com is only providing me the IC manual of TDA2050 as instructions.

I figured out most of the components except the capacitors and resistors, any help greatly appreciated. These are the caps and resistors and and I am attaching a picture of the pcb.

22K (red red?black red) ×4
680R (blue grey black) ×2
4.7R (brown black gold) ×1
4.7K (yellow purple red) ×3
Capacitors
470uF 50V electrolytic ×3
22uF 35V electrolytic ×4
1uF monolithic ×6



Thanks
Arvind

 

[madtecchy]

You picture is way to smal to see anything ... if you have the schmetic could you please post it on here..

 

[billyk]

Here is a link to the schematic. It lists the values for the resistors that you are looking for:
Schematic

 

[iinself]

You picture is way to smal to see anything ... if you have the schmetic could you please post it on here..

Sorry I will try to post a bigger picture.

 

[iinself]

Here is a link to the schematic. It lists the values for the resistors that you are looking for:
Schematic

Thank you, thank you !