TDA7375V instabilities - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th December 2012, 02:35 PM   #1
danny92 is offline danny92  Portugal
diyAudio Member
 
Join Date: Nov 2012
Location: Lisbon
Default TDA7375V instabilities

Hi everyone,
I'm using a TDA7375V in a breadboard, and seems to be a very good chipamp, the separated grounds are very good to use with a separated preamp. The problem I'm talking about occurs when the volume is raised, when the amplifier enter clipping it starts turning on and off quickly making strange noises. I'm using a 3 K/W heatsink. This also occurs with other power supplies.
Could be a problem in the built in protection system?
Thank you very much for your atention,
Best regards,
Daniel Almeida

Last edited by danny92; 30th December 2012 at 05:04 PM.
  Reply With Quote
Old 1st January 2013, 03:20 PM   #2
johnr66 is offline johnr66  United States
diyAudio Member
 
Join Date: Mar 2009
Sounds like the power supply decoupling capacitor is not close enough to the chip and/or the small signal ground has higher currents flowing in it from the power supply ground lead. BTL amplifier chips are very touchy with ground layout.
  Reply With Quote
Old 1st January 2013, 06:07 PM   #3
danny92 is offline danny92  Portugal
diyAudio Member
 
Join Date: Nov 2012
Location: Lisbon
Thank you very much for the repply,
Do you think I should try to mount this amp on a PCB layout, the problem is that I tried almost everything in the breadboard even leaving the amp alone and the input directly connected to it without any modules, but it seems to have some problem at the current limiting circuit, but I can be wrong can be a signal injection to ground that is causing this issue.
The problem is that I have broken a pin in the IC and I don't have any TDA7375V actually now I'm using TDA7297, but STA540 is similar isn't it. I think that's easier for me to buy TDA7375V, but I'm afraid of instabilities even in a PCB layout. I don't have PCB expereence .
Best regards,
Daniel Almeida
  Reply With Quote
Old 1st January 2013, 06:16 PM   #4
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Hi Danny,
I was going to say its like a similar thread I saw the other day... and it is... yours

Same answers I'm afraid. Attend to layout, grounding and so on and the problems dissappear.

That probably doesn't sound like much help but you have to walk before you can run.

Although its no real answer have you tried connecting the speaker return back to the power supply rather than via the breadboard (if thats how you have it now) ?
__________________
-------------------------------------------------------
Installing and using LTspice. From beginner to advanced.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 10:53 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2