diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Chip Amps (http://www.diyaudio.com/forums/chip-amps/)
-   -   TA2024 output noise? (http://www.diyaudio.com/forums/chip-amps/224228-ta2024-output-noise.html)

WTS 25th November 2012 12:22 AM

TA2024 output noise?
 
Just wondering if anyone has put a scope on the outputs of one of these to see how much switchig noise is present with no input,

Thanks

freax 25th November 2012 12:25 AM

i would imagine doing the measurement with the chip powered from a battery would be the best way to go, no need to colour the result by adding power supply noise to it.

that and doing it over several of these chips inorder to average the result.

come to think of it is the figure in the datasheet?

WTS 25th November 2012 05:52 PM

Hi, I'm not asking how to perform the measurement. Powering it from a battery isn't going to change or decrease the switching noise on the output, yes it would eliminate the power supply added noise, thanks.


All times are GMT. The time now is 09:29 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2