advice will i blow it up :/ - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th August 2012, 12:43 PM   #1
diyAudio Member
 
Join Date: Aug 2012
Default advice will i blow it up :/

Ok so my setup is cheap and but i think it sounds rather good
the thing is i have it setup in a strange way and want to know if it will blow up either my hifi or my power amp ok please look at the diagram and tell me if ime stupid or not lol

Click the image to open in full size.

My whole reason for doing it this way was to seperate the low wattage speakers from the power amp whilst still being able to use them
  Reply With Quote
Old 30th August 2012, 01:02 PM   #2
diyAudio Member
 
theAnonymous1's Avatar
 
Join Date: Feb 2004
Location: Anonymityville
Your picture resolution is only 180x124.
  Reply With Quote
Old 30th August 2012, 02:15 PM   #3
diyAudio Member
 
Join Date: Aug 2012
hmmm so i see lol ille try another image hoster
  Reply With Quote
Old 30th August 2012, 02:22 PM   #4
diyAudio Member
 
Join Date: Aug 2012
hmm so i see heres a better one i hope sorry about that Click the image to open in full size.

it would appera that every site is full of god damn adware i hate the net these days anyone got a suggestion for a good image hoster ?

Last edited by stenwo123; 30th August 2012 at 02:25 PM.
  Reply With Quote
Old 30th August 2012, 02:30 PM   #5
iko is offline iko  Canada
diyAudio Moderator
 
iko's Avatar
 
Join Date: May 2008
Location: Toronto
On the image shack site there's a button in the upper right corner, named Links to share this image. Click on it and attache the "direct link"
  Reply With Quote
Old 30th August 2012, 02:34 PM   #6
diyAudio Member
 
Join Date: Aug 2012
ok ille try to explain the way i have it setup sorry about all the posts for some reason the edit button isnt working for me :/

ok so i have the following

techniks hd50 mini seperates 90w
2x 60 watt techniks speakers
skytekc 480 pro power amplifier
2x 400 watt soundlab disco/pa speakers

so i have it setup as such

from the speaker outputs on my techniks hifi the cables firstly go to my techniks speakers

from there a cable for the left and a cable for the right go into the inputs to my power amp
then my power amp is connected to my 400w speakers

i was sometimes use my hifi without the power amp turned on ie i only use the basic 60 watt speakers

will sending power allbeit not a lot to the power amp when it is not turned on do any damage to the power amp

and when i have the power amp on am i risking blowing anything up the diagram displays it better than i explain
  Reply With Quote
Old 30th August 2012, 02:43 PM   #7
diyAudio Member
 
Join Date: Aug 2012
image shack wont let me use it now wtf lol anyhow i think ive got more than 1 double post waiting to be let through by the mods
  Reply With Quote
Old 30th August 2012, 02:58 PM   #8
iko is offline iko  Canada
diyAudio Moderator
 
iko's Avatar
 
Join Date: May 2008
Location: Toronto
Since you have the image on your own computer, you should just upload it when you post via the Go Advanced button. Here you go.
Attached Images
File Type: png bla.PNG (90.6 KB, 60 views)
  Reply With Quote
Old 30th August 2012, 03:12 PM   #9
diyAudio Member
 
theAnonymous1's Avatar
 
Join Date: Feb 2004
Location: Anonymityville
So you basically have the outputs of two different amps wired in parallel? Then yeah..... that's bad.
  Reply With Quote
Old 30th August 2012, 03:27 PM   #10
diyAudio Member
 
Frank Berry's Avatar
 
Join Date: Sep 2003
Location: Midland, Michigan
No. He has the outputs of one amp feeding the inputs of another amp.
I would add voltage dividers between the outputs of one amp and the inputs of the other.
__________________
Frank
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
It will probably blow up blistard The Lounge 13 6th December 2011 08:35 PM
NAD fuses, slow blow or fast blow? AllCaster Solid State 3 25th October 2009 06:11 PM
Blow up once, Blow up twice and Blow up somemore S.C Chip Amps 14 6th March 2005 12:09 AM
Will This Blow Up? Trout Tubes / Valves 8 6th February 2005 12:52 PM
Will it blow up? dickerbeen Everything Else 1 17th April 2003 05:21 AM


New To Site? Need Help?

All times are GMT. The time now is 06:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2