Bonzai CMOY.. Dead on One Channel - Page 2 - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st July 2012, 05:38 PM   #11
diyAudio Member
 
Join Date: Jul 2004
Location: dresden
Checked the caps, even with out caps I should still get the correct voltages..
Took the whole thing apart to double check for cold joints etc. Must be something got killed on the actual board so I write this off.
It would be nice if there was specific areas to test but I guess I will just build it back up on a bread board, which I should have done in the first place. This actual kit is a bit crap in its layout where you are supposed to solder caps and battery leads on a set of jumpers.

Money wasted lesson learned on this one.

IMHO if you are going to design a circuit board there should be no point in jumpers.
  Reply With Quote
Old 1st July 2012, 05:46 PM   #12
kumori is offline kumori  Europe
diyAudio Member
 
Join Date: Mar 2011
I thought the same, the board layout seems not be thought through to the end.
Good luck
  Reply With Quote
Old 3rd July 2012, 05:47 AM   #13
Puffin is offline Puffin  United Kingdom
diyAudio Member
 
Join Date: Feb 2006
Location: U.K
There was a thread a few years ago on RockGrotto.com about these amps. I seem to remember that the power layout was bad in that if one of the batteries died, it could induce DC into your headphones. There was a fix for it, which altered the layout.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
4 channel headphone amp based on Cmoy tomcc Headphone Systems 9 24th May 2011 12:55 AM
Left channel dead doubled Solid State 10 11th April 2010 11:19 AM
one channel chip dead???? joka22 Chip Amps 5 8th January 2009 09:52 PM
So, I finally built a 3 channel cmoy TheSeekerr Chip Amps 11 23rd October 2008 09:15 PM
Dead channel Carlp Tubes / Valves 15 1st February 2007 03:54 AM


New To Site? Need Help?

All times are GMT. The time now is 10:45 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2