LM3886 Zobel's network - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th June 2012, 10:24 AM   #1
diyAudio Member
 
Join Date: Dec 2011
Location: Camponogara (VE)
Default LM3886 Zobel's network

Hello everyone,
for the Zobel's network in the output of a circuit with 3 LM3886 put in parallel, what kind of resistances is most appropriate (Eg. Carbon / Metal oxide)?
In terms of tolerance and power, what are the right values​​?
thanks a lot
  Reply With Quote
Old 10th June 2012, 10:44 AM   #2
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
If you never test the HF power output then you never need high power dissipation capability in the Zobel. Ordinary 600mW resistors will do. One to each 3886.
The caps should be low esr. Any film type should be good but go to higher voltage rating than the Rail to Rail. Try 100Vdc
1%, or 2%, or 5%, or 10% tolerance are all OK.

Carbon composition have low inductance and there may be an argument for using low inductance here. But few if any seem to bother with that. I use metal film. But I beef up the power rating because I do sometimes test with HF high power signals. 4off series parallel 10r 600mW gives 10r 2.4W
__________________
regards Andrew T.
  Reply With Quote
Old 11th June 2012, 08:19 AM   #3
diyAudio Member
 
Join Date: Dec 2011
Location: Camponogara (VE)
Thank you, Andrew.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
LM3886 feedback network BarryV Chip Amps 7 11th February 2012 02:38 PM
Are two separate lm3886 = 2*lm3886 in parallel or bridge mode rs1026 Chip Amps 11 21st October 2004 11:24 AM
Zobel Network nuttinbutSQ Multi-Way 6 16th March 2004 09:19 AM
T network capacitors toseland Solid State 0 14th May 2002 02:16 PM
Network Analyzer hugeli60 Solid State 4 15th March 2002 04:00 PM


New To Site? Need Help?

All times are GMT. The time now is 10:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2