Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Power fuse suggestions needed for TDA7293 amp
Power fuse suggestions needed for TDA7293 amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 4th June 2012, 04:06 PM   #1
Ivchikx is offline Ivchikx  Latvia
diyAudio Member
Join Date: Feb 2011
Location: Baldone, Latvia
Power fuse suggestions needed for TDA7293 amp
Default Power fuse suggestions needed for TDA7293 amp

I'm planning to build a TDA7293 amp for my music studio (to amplify keyboard, some mics, acoustic guitar). The idea is to use 6 chips, 2 pairs in bridge and rest 2 chips in single configuration. Have 600VA toroid laying around with 2x24V 2x12.5A AC. Here's the questions:
- Is that toroid sufficient to power 6 chips?
- Where to put rail fuses? On each rail of power supply output or pair on every single chip power inputs? What is the rating of fuses need for this application?

Hope someone can help.
  Reply With Quote
Old 5th June 2012, 04:57 PM   #2
pacificblue is offline pacificblue  Germany
diyAudio Member
Join Date: May 2008
That toroid is big enough to power 6 channels. The voltage may be a bit high for bridging, at least if you don't happen to have 16 Ohm speakers.

Using a pair of fuses per amp makes it easier to find which amp is faulty, if that case occurs. But you have to make sure that the combined fuse rating does not surpass 12,5 A. Otherwise you will need a 12,5 A main fuse before all the others that protects the transformer from overload.

The fuse rating for each channel depends on the use. 2-3 A should normally be sufficient, 4 A is the maximum. Start small and work yourself upwards, if you face convenience blowing.
If you've always done it like that, then it's probably wrong. (Henry Ford)
  Reply With Quote


Power fuse suggestions needed for TDA7293 ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
TDA7294 + Power Transistors AMP (TDA7293 to come also) dr frost dk Chip Amps 635 14th September 2017 10:47 PM
Help needed: speaker internal amp blows fuse timnet Solid State 27 16th November 2011 06:33 AM
Power supply suggestions needed Budric Parts 6 17th February 2008 05:49 AM
TDA7293 with OPA2604 suggestions Tihi Chip Amps 7 22nd April 2005 10:20 AM
Adcom 555 amp fuse help needed hellotheworld Solid State 4 12th October 2004 07:02 AM

New To Site? Need Help?

All times are GMT. The time now is 10:43 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio