|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Chip Amps Amplifiers based on integrated circuits |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
25th January 2011, 10:15 AM
|
#1 |
|
diyAudio Member
Join Date: Jan 2011
|
Optical in vs analog in via Ext Decoder input
While looking through the service manual of my Yamaha DSP-A595 I noticed there was an exterior decoder input which seems to bypass alot of the circuitry of the amp.
At the moment Im using the amp for stereo only and have an optical out from my soundcard. When I tried an analoge out ( 3.5mm to rca) from the soundcard into the ext decoder input i noticed a significant improvement in the sound. With this in mind im going to do that x-fi mod on my soundcard and hopefully gain more improvement. Question? 1.Does this seem a good idea and have I overlooked anything. btw I will only be using the amp for stereo playback. Below is the Block diagram |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| converting optical to rca analog | kazoo | Digital Source | 8 | 22nd March 2007 05:24 PM |
| Analog Surround Decoder | marinbnm | Analogue Source | 3 | 9th November 2004 02:27 AM |
| Optical/Coax to analog? | soundNERD | Digital Source | 2 | 29th September 2003 03:01 AM |
| DIY Digital Optical Out Decoder | ajhawkins | Digital Source | 7 | 30th August 2002 09:30 PM |
| New To Site? | Need Help? |
| Page generated in 0.16294 seconds (32.64% PHP - 67.36% MySQL) with 11 queries |
