|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Chip Amps Amplifiers based on integrated circuits |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
15th July 2003, 05:39 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2002
Location: Ontario, Canada
|
CCS for Joe's tube GC
I'm thinking about building Joe Rasmussen's tube gainclone project, but I've been wondering about the possibility of adding a constant current source for the cathode follower.
I know this is probably fairly simple, but my design experience is minimal, so I'm calling on the experts to help. To keep the cost and complexity to a minimum, I'm thinking about a FET-based ccs. Also, I have a bunch of 1N936 diodes, which are apparently temperature compensated 9.0V zeners. Would these be appropriate for a ccs? |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| need diy tube preamp (line-stage) recommendation and general tube advice | Musiclover4 | Tubes / Valves | 16 | 18th May 2013 03:19 PM |
| FS tube tuner, Active filter kit, tube amp, amp3 | Josephjcole | Swap Meet | 9 | 20th July 2007 04:05 PM |
| SS or tube voltage amplifying stages in an amp with tube output? | ray_moth | Tubes / Valves | 14 | 4th July 2007 03:09 AM |
| tube driving the same tube - whats the collective word? | zobsky | Tubes / Valves | 3 | 13th June 2005 06:47 AM |
| New To Site? | Need Help? |
