Noble Pot

reaper996 · 4th September 2010, 11:38 PM

I purchased a 50K Noble pot a while back for my amp project and did not realize until this morning that it missing the washer and flat nut. I am not so concerned about the washer and I have not been able to locate the flat nut. Does anyone know if this is a standard or metric nut and if so what is the threading? Better yet, where can I find one.

Thanks.

theAnonymous1 · 5th September 2010, 12:24 AM

Can you measure the diameter of the threaded part? I might have one that will fit.

reaper996 · 5th September 2010, 02:04 AM

It is 5/16" or 8mm and a fine thread.

theAnonymous1 · 5th September 2010, 12:07 PM

Bummer, I think you are right between the two sizes I have. Mine measure ~7mm and ~9mm.

random007 · 7th September 2010, 04:58 PM

Automotive spare parts and car ethusiast stores often stock little packets of bizarre sized nuts/bolts/washers - might be worth having a nose around if there's one in your area.

4th September 2010, 11:38 PM	#1
reaper996 diyAudio Member Join Date: May 2009 Location: Northern Virginia	Noble Pot I purchased a 50K Noble pot a while back for my amp project and did not realize until this morning that it missing the washer and flat nut. I am not so concerned about the washer and I have not been able to locate the flat nut. Does anyone know if this is a standard or metric nut and if so what is the threading? Better yet, where can I find one. Thanks.

5th September 2010, 12:24 AM	#2
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	Can you measure the diameter of the threaded part? I might have one that will fit. __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

5th September 2010, 12:07 PM	#4
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	Bummer, I think you are right between the two sizes I have. Mine measure ~7mm and ~9mm. __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nUTS FOR nOBLE AP25 pot	Lee35210	Parts	3	7th January 2010 10:59 PM
Noble 100K pot.	mattjk	Swap Meet	0	21st January 2008 02:50 AM
Which pot? Noble or Alps? Or another?	deiksac	Parts	1	12th May 2007 04:47 AM
noble stereo pot	mantisory	Everything Else	5	28th April 2005 05:39 PM
Need help to connect my Noble pot	kanaddict	Chip Amps	3	26th January 2005 04:49 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th September 2010, 02:04 AM	#3
reaper996 diyAudio Member Join Date: May 2009 Location: Northern Virginia	It is 5/16" or 8mm and a fine thread.

7th September 2010, 04:58 PM	#5
random007 diyAudio Member Join Date: Aug 2010 Location: Adelaide	Automotive spare parts and car ethusiast stores often stock little packets of bizarre sized nuts/bolts/washers - might be worth having a nose around if there's one in your area.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read