500 watt amp build

jimmy audio · 14th August 2010, 06:03 PM

I am using 2 stk 4048xi modules for the left and right channels and 1 stk 4050v for the sub output. I have 2 transformers,one has 47-0-47 ac output and 66-0-66 vdc after the caps the other one is 34-0-34 ac output and 48-0-48 after the caps. My question is should i use the higher voltage tranny to power up the 4048's they will be driving 16 ohm loads {2 bose 301's per channel} and use the lower voltage tranny to power up the 4050 {1 12 inch 4 ohm 175 watt rms sub} yes 4 ohm! Sound workable?? and what can i expect for power out from the 4050 at 48-0-48 and 4 ohms?? the boards are built and i would like to build the power supplies! thanks for any help in this matter i would like to hear from anyone with experience powering up these sanyo modules!

gszekeres1 · 17th August 2010, 02:20 PM

I think you have the idea. I didn't compute numbers, but with an easy load you can max out the input voltage. I have only used the 4050, and one channel blew, after years
of a heavy load in a disco type setting. I think a woofer coil shorted. otherwise
it would still be working. I got some which I don't know if I'm going to use.
I liked to sand the metal smooth, but its hard finding a flat surface.

14th August 2010, 06:03 PM	#1
jimmy audio diyAudio Member Join Date: Jul 2010 Location: northern minnesota	500 watt amp build I am using 2 stk 4048xi modules for the left and right channels and 1 stk 4050v for the sub output. I have 2 transformers,one has 47-0-47 ac output and 66-0-66 vdc after the caps the other one is 34-0-34 ac output and 48-0-48 after the caps. My question is should i use the higher voltage tranny to power up the 4048's they will be driving 16 ohm loads {2 bose 301's per channel} and use the lower voltage tranny to power up the 4050 {1 12 inch 4 ohm 175 watt rms sub} yes 4 ohm! Sound workable?? and what can i expect for power out from the 4050 at 48-0-48 and 4 ohms?? the boards are built and i would like to build the power supplies! thanks for any help in this matter i would like to hear from anyone with experience powering up these sanyo modules!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
200- 500 watt Tube Amp project	toddbailey	Tubes / Valves	99	23rd January 2011 08:28 PM
Help With A 500 Watt subwoofer and a 1000 amp	Bgpoet	Solid State	2	30th December 2008 07:41 AM
BASH 500 watt rack amp help to tweak	asiquis	Solid State	2	28th March 2008 04:39 AM
FS : O-Audio 500 watt bash sub amp	Toast_Master	Swap Meet	0	5th December 2007 06:53 AM
need 500 watt subwoofer amp kit	gompka	Solid State	7	19th February 2006 01:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th August 2010, 02:20 PM	#2
gszekeres1 diyAudio Member Join Date: Aug 2010 Location: near Pittsburgh	I think you have the idea. I didn't compute numbers, but with an easy load you can max out the input voltage. I have only used the 4050, and one channel blew, after years of a heavy load in a disco type setting. I think a woofer coil shorted. otherwise it would still be working. I got some which I don't know if I'm going to use. I liked to sand the metal smooth, but its hard finding a flat surface.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)