tabs touching, no output - Page 4 - diyAudio
Go Back   Home > Forums > Amplifiers > Chip Amps
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd July 2003, 01:26 PM   #31
moamps is offline moamps  Croatia
diyAudio Member
Join Date: Oct 2002
Location: Croatia
Originally posted by Matttcattt
i know this should be true, but both chips tabs are at 0.3v from ground.
Disconnect amp from power, discharge and desolder PS caps from chip, then measure resistance between "3,4" and tab. If isn't close to zero, than chips are faulty (or apps note is faulty ?!).

  Reply With Quote
Old 4th July 2003, 10:07 AM   #32
diyAudio Member
Matttcattt's Avatar
Join Date: Feb 2003
Location: Bristol
i was trying to measure some resistors with my multimeter and was getting no reading, i found that one of my test leads was broken. i have re-tested the tabs with a new set of (working) test probes, and they are both at -15v as they should be. strangly, both amps still work when the tabs are connected. maybe when i noticed that they didnt work when the tabs were connected was a freak incedent.

sorry to waste your time.
If it aint broke, don't fix it. If it is broke, fix it.
If you can't fix it, take it apart and see how it "worked".
  Reply With Quote
Old 6th July 2003, 01:41 AM   #33
diyAudio Member
Join Date: Apr 2002
Location: orange ca
Send a message via AIM to travis
wait, can i mount two chips to the heatsink or not? if i use one set of filter caps?
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
3C24 in a SE output stage - output transformer impedance recommendation !!! aldovan Tubes / Valves 15 6th September 2008 10:18 AM
Adding secondary of output transformer into cathodes of output stage ? Eico ST-70 freddymac406 Tubes / Valves 3 21st April 2007 06:15 PM
Soldering Binding Posts - Solder Tabs disconnec Multi-Way 5 20th September 2005 02:28 AM
I2S digital output in Marantz CD4000 and four TDA1541A with balance analog output iklari14 Digital Source 30 18th July 2003 12:57 PM

New To Site? Need Help?

All times are GMT. The time now is 03:06 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2