diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Chip Amps (http://www.diyaudio.com/forums/chip-amps/)
-   -   looking for some pot (http://www.diyaudio.com/forums/chip-amps/161843-looking-some-pot.html)

thetube0a3 22nd February 2010 03:11 PM

looking for some pot
 
hey guys,

i'm looking for a quality stereo pot for use with my lm3886 amp. 20-50K should be fine I just want something that is very long lasting and pretty closely matched.


also must be panel mount

infinia 22nd February 2010 03:23 PM

here's one connextion for ya Blue Velvet quite legal too

thetube0a3 22nd February 2010 03:40 PM

I knew that title would catch someones attention :)

Ah only $17-20 for one too, nice

Apex Jr 22nd February 2010 03:58 PM

You can also try me...

I have a couple of Dual 25K's.
One is made by Alps (Smaller) and the other by Noble (Larger)
Alps is $4.95ea and the Noble is $5.95ea

Steve @ Apex Jr.

These are not listed on the website but in stock.

thetube0a3 22nd February 2010 05:08 PM

Steve @ Apex Jr, Are either of these pots conductive plastic, or are both carbon?

Apex Jr 22nd February 2010 05:30 PM

TheTubeOA3...

Not sure but took down part numbers:

The Alps is a 426N 25K MN and measures 3/4" W X 1" D X 5/8" Tall
metal and plastic body
The Noble is a 220Y 25KX2 and measures 1" W X 1" D X 1 1/8" Tall
all plastic body
HTH

Steve @ Apex Jr

infinia 22nd February 2010 05:30 PM

Quote:

Originally Posted by Apex Jr (Post 2094576)
You can also try me...

I have a couple of Dual 25K's.
One is made by Alps (Smaller) and the other by Noble (Larger)
Alps is $4.95ea and the Noble is $5.95ea

oooh I'm Interested
Steve any other info, part no's, images, etc
esp the Nobel

infinia 22nd February 2010 05:39 PM

Audio taper?
panel mount?
shaft dimensions?

can't turn up any data sheets googled www.nobleusa.com 220y 25kx2

Apex Jr 22nd February 2010 06:02 PM

Infinia...
Taper I do not know
Panel Mount
3/8" Bushing
5/8" long metal shaft
1/4" Shaft
There not expensive and probably worth a try


Steve @ Apex Jr.

infinia 22nd February 2010 06:39 PM

Quote:

Originally Posted by Apex Jr (Post 2094758)
Taper I do not know

Steve @ Apex Jr.

thanks

audio taper is about 20% of max resistance at center
linear is 50% at center

mismatch between the 2 sections seperates the Quality from the chaff
say at 1/4 and 1/2 positions


All times are GMT. The time now is 01:14 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2