so after sending back my control unit for replacement several times due to the lcd back light going out, they sent me an entire unit. i've ended up with 2 sets and only 1 control unit.
so i tried connecting the 2 units with some SVGA cables i soldered up but got some slight burning smells so i gave up on it.
i was looking for a second control unit on ebay and came across the cables that allow you to use the speakers without the control pod. that brought me to this site looking for a wiring diagram of the plug.
i've purchased a Y splitter cable and plan to hook up the 2 units that way. i used this picture and will only connect the wires that are highlighted in the pictures, do you see any problems with this?
http://img526.imageshack.us/img526/8553/122209164739.jpg
thanks in advance.
so i tried connecting the 2 units with some SVGA cables i soldered up but got some slight burning smells so i gave up on it.
i was looking for a second control unit on ebay and came across the cables that allow you to use the speakers without the control pod. that brought me to this site looking for a wiring diagram of the plug.
i've purchased a Y splitter cable and plan to hook up the 2 units that way. i used this picture and will only connect the wires that are highlighted in the pictures, do you see any problems with this?
http://img526.imageshack.us/img526/8553/122209164739.jpg
thanks in advance.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.