Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

Grounding buzzing amps in general
Grounding buzzing amps in general
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 29th May 2003, 09:56 AM   #1
Gerontius is offline Gerontius  United Kingdom
diyAudio Member
Join Date: May 2003
Location: Cambridge, UK
Default Grounding buzzing amps in general


I built a 4-channel LM3886 amp using my own design circuit board and a standard app note non-inverting circuit from National with zobel and 0.7 uH inductor. I had a terrible buzz (more harmonics than a simple hummmmm) for weeks and searching this forum led me to a 95% solution. Somebody had a problem with exactly the same symptoms as mine and the solution for their problem mostly worked for me. THANKS MOAMPS. The thread is here. Now my actively crossed-over dipole speakers are listenable and sound fantastic.

My grounding scheme is the same as recommended by moamps in that thread and has the amp ground, RCA input grounds, speaker grounds, and transformer center tap all meeting at the 0V of the filter caps, then a single wire goes from there to the case.

There is still a little quiet hum that is audible from about 3 feet away and the tweets hiss and crackle very quietly and you can hear that from about 5 feet away. You don't notice it with music, but it's there when there is a very very quiet passage or between tracks.

Also, one of the amps ( the one that is only a few centimeters from the input jack) whines, whistles, and pops loudly at a frequency of about 3 Hz unless RCA cable connected to the outside of the case (the cable doesn't need to be connected to anything/ if a cable is there, the chip is 95% silent).

Also, I've notices that if I move the ground wire going between the RCAs to the filter caps, the hum gets louder the closer the ground wire is to the transformer, and also changes when it is at different angles to the transformer.

I've noticed that some published circuit boards, say from Rod Elliot or Elektor,have connections ON THE AMP BOARD for input ground and speaker ground. My speaker grounds and input grounds never go anywhere near the amp board and only meet up at the filter caps. This is great for neatness because it saves several wires snaking around the case. I was just wondering if I was asking for trouble with ground loops and oscillation by doing this.

Any comments or suggestions? Thanks.
  Reply With Quote


Grounding buzzing amps in generalHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lions and Tigers and Grounding Problems, Oh My! DoZ Grounding... EchoWars Solid State 37 3rd August 2008 08:50 AM
Buzzing Pre-amp stevebell Solid State 10 12th June 2008 03:26 PM
LM3875 kit grounding, optimal grounding for separate amps and psu? findog Chip Amps 9 16th May 2005 09:27 PM
Grounding in Power Amps richie00boy Solid State 1 8th December 2003 03:56 PM
Buzzing in A40 NickC Pass Labs 9 25th August 2003 11:42 AM

New To Site? Need Help?

All times are GMT. The time now is 03:30 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio