Audio Sector Help

Kublai · 6th October 2009, 11:30 PM

Hi,

Recently purchased an Audio Sector integrated amp. Love this amp but I am trying to simplify. Is there anyway I can hook it up to the pre-outs of my av HK 1005 receiver so that I don't have to switch my speakers when I watch movies. Answers in layman terms are appreciated. Thx

Peter Daniel · 7th October 2009, 02:17 AM

Just hook it up as any other source.

Kublai · 7th October 2009, 03:02 AM

Thank you very much for your prompt reply. Sorry about the need for clarification but I am not very well versed in this forum. Do you mean that I should hook the amp to the receiver through standard rca source inputs ( like aux) or the other way around on the int. amp. Or just hook it up to the L & R pre outs on the receiver. Don't want to blow anything up. Thanks for your patience and thank you for such a lovely product.

Peter Daniel · 7th October 2009, 03:11 AM

The way I understood it, you want to use "pre out" output on your receiver. This is line level signal and you can connect it to RCA inputs on the integrated amp. It should work the same as hooking any other source input.

6th October 2009, 11:30 PM	#1
Kublai diyAudio Member Join Date: Oct 2009	Audio Sector Help Hi, Recently purchased an Audio Sector integrated amp. Love this amp but I am trying to simplify. Is there anyway I can hook it up to the pre-outs of my av HK 1005 receiver so that I don't have to switch my speakers when I watch movies. Answers in layman terms are appreciated. Thx

7th October 2009, 02:17 AM	#2
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Just hook it up as any other source. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

7th October 2009, 03:11 AM	#4
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	The way I understood it, you want to use "pre out" output on your receiver. This is line level signal and you can connect it to RCA inputs on the integrated amp. It should work the same as hooking any other source input. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio sector gainclone.	dome406	Chip Amps	33	31st May 2010 02:12 AM
audio sector- lm4780 kit	richyrich212t	Chip Amps	1	25th August 2007 10:14 PM
FS: Audio Sector DAC $180	sts9fan	Swap Meet	2	8th June 2007 01:46 AM
Finished Audio Sector NOS DAC*	vdi_nenna	Digital Source	4	4th February 2007 05:49 PM
Help with Audio Sector NOS DAC	vdi_nenna	Digital Source	14	14th January 2007 03:31 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th October 2009, 03:02 AM	#3
Kublai diyAudio Member Join Date: Oct 2009	Thank you very much for your prompt reply. Sorry about the need for clarification but I am not very well versed in this forum. Do you mean that I should hook the amp to the receiver through standard rca source inputs ( like aux) or the other way around on the int. amp. Or just hook it up to the L & R pre outs on the receiver. Don't want to blow anything up. Thanks for your patience and thank you for such a lovely product.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read