NTE 7197 chips

DynacoDave · 10th June 2009, 05:48 PM

Any circuit designs around for this chip? When I searched, I didn't see a single post on this.

DcibeL · 10th June 2009, 06:13 PM

NTE as far as I know manufactures equivalent replacement parts for existing parts from other manufacturer's.

This part looks to be a replacement part for LM3886. Search LM3886 and you will find lots of information.

[Edit: Confirmed. Go to NTE website and search LM3886 cross-reference and you find NTE7197]

DynacoDave · 10th June 2009, 06:44 PM

Yep. And thank you. I saw that on the parts store ordering system. They could not find a Philips sample schematic, like the ones Natonal Semiconductor's provides on their spec sheets.
I was thinking that the pin out was the same as the LM3886 but just wanted to be sure before the solder starts to melt.

10th June 2009, 05:48 PM	#1
DynacoDave diyAudio Member Join Date: Dec 2006	NTE 7197 chips Any circuit designs around for this chip? When I searched, I didn't see a single post on this.

10th June 2009, 06:13 PM	#2
DcibeL diyAudio Member Join Date: May 2003 Location: Saskatchewan	NTE as far as I know manufactures equivalent replacement parts for existing parts from other manufacturer's. This part looks to be a replacement part for LM3886. Search LM3886 and you will find lots of information. [Edit: Confirmed. Go to NTE website and search LM3886 cross-reference and you find NTE7197] __________________ Do It Someone Else!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any 24 bit NOS DAC chips?	neutron7	Digital Source	6	29th October 2006 09:48 AM
nte chips	odysseybmx414	Chip Amps	1	29th September 2005 09:30 PM
Where to buy chips like DAC etc ?	marcaureleii	Parts	1	18th July 2005 09:17 PM
Chips for Chumps aka "Intelligent Chips"	jackinnj	Solid State	0	15th April 2005 01:37 AM
Stk-chips	Mikelmonster	Chip Amps	2	27th May 2004 06:22 AM

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=291030' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=291030&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

10th June 2009, 06:44 PM	#3
DynacoDave diyAudio Member Join Date: Dec 2006	Yep. And thank you. I saw that on the parts store ordering system. They could not find a Philips sample schematic, like the ones Natonal Semiconductor's provides on their spec sheets. I was thinking that the pin out was the same as the LM3886 but just wanted to be sure before the solder starts to melt.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)