diyAudio (
-   Chip Amps (
-   -   PCB for TDA7293 (

jbdivx 3rd April 2009 11:15 PM

PCB for TDA7293
hello Everybody ,

I want to make the TDA7293 amplifier , but I don't find a PCB for do the typon !

Unfortunately, on the datasheet , there isn't the PCB of the Simple montage

Do you have it ?

Thnaks for all

pacificblue 4th April 2009 06:58 AM

Are you looking for a layout to make your own PCB?

Or for a PCB to buy?

Did you try the search button?

Minion 4th April 2009 03:19 PM

I used the PCB in the datasheet and it worked fine and was an easy to make and etch PCB... I have a ready to etch Image of this PCB design if you want it ....

If you look on e-bay you can buy a stereo TDA7293 Kit with all Parts and PCB for about $23 US which is about the price of just the two TDA7293 chips....


pacificblue 4th April 2009 05:13 PM

I think, jbdivx did not like the layout in the datasheet, because he prefers the TDA next to the PCB edge for easy mounting to a heatsink.

jbdivx 4th April 2009 05:40 PM

Thnaks for your help !

i find the kit on Ebay :

On the photo , we can see a " stereo model " , but in the description it's not mentioned, so I well send a mail to the seller.

On this kit , probably , this isn't the best components (MKP, ceremaiq resistor same Vishay )

So probably , i will buy the kit and modify some components


Minion 4th April 2009 05:56 PM

Hi ,Yes it is a stereo model but can also be wired in Bridge mode or Paralell for mono, the Kit comes with instructions on how to do this .....

That is the same one I just bought , it hasn"t come yet though... I also bought the power supply board which was $6 and comes with the bridge rectifier and terminal blocks and some smaller value caps and a couple resistors (Snubber ?) but doesn"t come with the big PSU Caps but still a damn good deal for $6 ..... His kits are the least expensive out of all the kits I have looked at I just hope they aren"t cheap....


Stee 2nd May 2010 01:29 PM

Tda 7293 four in bridge/parallel
2 Attachment(s)
Hi see the schematic
you can find on ebay
works better with a 6922 in cathode follower on input:)
to build
a perfect hybrid:cool:

dudaindc 17th May 2010 11:19 PM

Interesting... I may give it a try... :rolleyes:

pranam77 7th October 2010 02:45 PM

High resolution Circuits please

Originally Posted by Stee (
Hi see the schematic you can find on ebay
works better with a 6922 in cathode follower on input:) to build
a perfect hybrid:cool:

Could you please upload the better quality images of the same. These are ok..but a bit blur and coudnt have a clear view.

All times are GMT. The time now is 06:07 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2