Hi guys, I have built a TDA2052 amp and PSU and very happy with it. I want to now include a tone control, but use a PGA2310 for volume control. I had a look at a few sites (including Rod Elliotts) but not completely sure of what circuit to build. I have seen a few kits that use the TDA1524A. Is this any good? If I should build it from scratch using an op-amp, can someone please suggest a circuit and op-amp if it is not included. I have little experience designing a circuit, but once I have scematics, can easily build the circuit!
*One thing that confused me was that when I was reading about one tone control (Baxandall), it mentioned that the tone control inverted the signal, and the volume control would undo this. Would this still work if I used a PGA2310
Thanks
Anthony
*One thing that confused me was that when I was reading about one tone control (Baxandall), it mentioned that the tone control inverted the signal, and the volume control would undo this. Would this still work if I used a PGA2310
Thanks
Anthony
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.