Just ordered from peter daniels

joka22 · 2nd August 2008, 02:23 PM

I just ordered my first kit from peter daniels It was 2 amp pcb 2 rectfier bridge pcb and components. I think this is the classic dual mono kit i be using it in the stereo mode as I will use one toriod.
So i think i have spare rectifier bridge left as everyone who using the amp in stereo mode are using one rectifier bridge.

Just been on the antek website looked at the 3222 toriod. i asked john is this suitable for gainclone as i need 300va 2x22v he said yh it is suitable. but on the pdf file it shows one 230v and 2 115v and just one 22v secodnary.

lanchile07 · 2nd August 2008, 04:35 PM

Well,the kits from Peter Daniel (Audiosector) will include everything you need to build your GC.He even have Plitron transformers(very good),potentiometers(noble) just in case you need to order too.

PS: take your time to build it.Do not rush it.that way you will not make mistakes.Good luck.

d to the g · 2nd August 2008, 05:04 PM

I just looked at the anteck pdf, and I'm pretty sure that the 3222 is supposed to have two 22 V secondaries. The 220 is most likely a typo. I'd email John to make sure that's the case though. I have a 500 VA trafo that from Antek that's been pretty good. Not great, but considering the price difference between Antek and Plitron, I can easily put that trafo in a shielded power supply box.

joka22 · 2nd August 2008, 05:10 PM

There is this great british website i really want to buy from them for 47 pound in total for the toriod but they not replied back to me as i can only pay by paypal as no money on the credit card.

wait here it is http://www.airlinktransformers.com/checkout.asp

so peter sells toriods to and noble pots i wonder if he is online so i request them as well.

here is the link of my old amplfiier now stripped to make room for the gainclone. I hyave moved the heatsinks from the back to front end of the section of the amp.

http://img162.imageshack.us/my.php?image=pic1nt3.jpg

Here is another pic this time of my tools and bits taken from the amp which were toriod on sale now on ebay. I still got the 80vdc 6800uf caps , bridge (square thing) and screws and toshiba trans.

http://img379.imageshack.us/my.php?image=pic2hl5.jpg

2nd August 2008, 02:23 PM	#1
joka22 diyAudio Member Join Date: Jun 2007	Just ordered from peter daniels I just ordered my first kit from peter daniels It was 2 amp pcb 2 rectfier bridge pcb and components. I think this is the classic dual mono kit i be using it in the stereo mode as I will use one toriod. So i think i have spare rectifier bridge left as everyone who using the amp in stereo mode are using one rectifier bridge. Just been on the antek website looked at the 3222 toriod. i asked john is this suitable for gainclone as i need 300va 2x22v he said yh it is suitable. but on the pdf file it shows one 230v and 2 115v and just one 22v secodnary.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Center tap torroid wiring to peter daniels kit???	Socrates428	Chip Amps	10	23rd May 2008 04:45 AM
Gain of the Thorsten/Peter Daniels gainclone?	JoeBob	Chip Amps	100	26th July 2003 08:04 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd August 2008, 04:35 PM	#2
lanchile07 diyAudio Member Join Date: Oct 2007	Well,the kits from Peter Daniel (Audiosector) will include everything you need to build your GC.He even have Plitron transformers(very good),potentiometers(noble) just in case you need to order too. PS: take your time to build it.Do not rush it.that way you will not make mistakes.Good luck.

2nd August 2008, 05:04 PM	#3
d to the g diyAudio Member Join Date: Aug 2006 Location: minimalopolis	I just looked at the anteck pdf, and I'm pretty sure that the 3222 is supposed to have two 22 V secondaries. The 220 is most likely a typo. I'd email John to make sure that's the case though. I have a 500 VA trafo that from Antek that's been pretty good. Not great, but considering the price difference between Antek and Plitron, I can easily put that trafo in a shielded power supply box.

2nd August 2008, 05:10 PM	#4
joka22 diyAudio Member Join Date: Jun 2007	There is this great british website i really want to buy from them for 47 pound in total for the toriod but they not replied back to me as i can only pay by paypal as no money on the credit card. wait here it is http://www.airlinktransformers.com/checkout.asp so peter sells toriods to and noble pots i wonder if he is online so i request them as well. here is the link of my old amplfiier now stripped to make room for the gainclone. I hyave moved the heatsinks from the back to front end of the section of the amp. http://img162.imageshack.us/my.php?image=pic1nt3.jpg Here is another pic this time of my tools and bits taken from the amp which were toriod on sale now on ebay. I still got the 80vdc 6800uf caps , bridge (square thing) and screws and toshiba trans. http://img379.imageshack.us/my.php?image=pic2hl5.jpg

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)