TI (Burr Brown) INA217

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
M

M.Joshi

Member
Joined 2003
Hello,

I would like to use the INA217 as an electret insert pre-amp and have the option of driving either an unbalanced or balanced output.

I was unable to find any suitable circuits for this and the design notes in the datasheet don't mention electret inserts.

Is it fairly easy to interface a 2-terminal insert to the differential input of an INA217 IC?

I intend to run the circuit from a 9V battery - will I require two for a balanced output or can it be achieved with just one?

Thanks.
 
annex666

annex666

Member
Joined 2002
There's a simple mic. preamp circuit on the linkwitzlab Lab website:

mic-amp.jpg


Hopefully this is useful to you ;)

Note: You could use the "spare" opamp in the dual-opamp shown in an inverting configuration and actively drive the balanced output.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom