Re: App notes
do you have a link?
Sawzall said:Take a look at the National Overture app notes - it describes bridging and paralleling up to 200w.
do you have a link?
I believe they were referring to this application note:
http://www.national.com/appinfo/audio/files/BPA-200_Application_Note.pdf
or
Look at part 7.0 (pretty much the same as above) at this link:
http://www.national.com/an/AN/AN-1192.pdf
Hope these help.
http://www.national.com/appinfo/audio/files/BPA-200_Application_Note.pdf
or
Look at part 7.0 (pretty much the same as above) at this link:
http://www.national.com/an/AN/AN-1192.pdf
Hope these help.
Mats J said:I believe they were referring to this application note:
http://www.national.com/appinfo/audio/files/BPA-200_Application_Note.pdf
or
Look at part 7.0 (pretty much the same as above) at this link:
http://www.national.com/an/AN/AN-1192.pdf
Hope these help.
thanks, just what i wanted
Here's a thread right here on DIY Audio
How can people like Peter Daniel not be tempted to try a bridged
amp? They are in a position to see if there are sonic compromises.
http://www.diyaudio.com/forums/showthread.php?s=&postid=181872#post181872
How can people like Peter Daniel not be tempted to try a bridged
amp? They are in a position to see if there are sonic compromises.
http://www.diyaudio.com/forums/showthread.php?s=&postid=181872#post181872
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- Bridging of the Gainclone ??