Where can I find Smallest Volume Remote Kit ??

calico88 · 15th June 2008, 12:07 PM

Since my box are tiny, smaller than 5cm X 5 cm for remote volume space, does anyone ever seen the Volume Remote Kit ? (DIY) ??

or buy the ready to use ?
as long as small/tiny.

I saw threads mith any kits but they are big for my box.

thanks
cal

Bluto · 16th June 2008, 03:57 AM

Cal -

Can't recall dimensions but there is a Scandinavian guy who sells kits right here in forum in sellers area.

Bluto

calico88 · 16th June 2008, 04:18 AM

I couldn't find the scandinavian guy who posted the remote...

any hint ?

cal

JesseG · 16th June 2008, 04:47 AM

Smallest I have ever seen = I have one and it orks great!

http://www.diygene.com/servlet/the-415/4-way-Motorized-Remote/Detail

theAnonymous1 · 16th June 2008, 05:06 AM

This PGA23XX/CS3310 IR controller board is fairly small, but it requires a seperate board with the PGA23XX/CS3310 on it (which could be made even smaller).

http://www.tauntek.com/irvc-ir-maste...me-control.htm

calico88 · 16th June 2008, 05:55 AM

thank you for the site remote tiny control board.
but i have no clue how to connect them together with the additonal board.

and i was thinking using it with small motor from cellular vibrator motor to control the potentionmeter.
I can build the mechanical gear for the pot. but I have no idea how the electronic part .

cal

pacificblue · 16th June 2008, 09:35 AM

Here is "the Scandinvian guy" from post #2

http://electronics.dantimax.dk/Kits/...rds/index.html

calico88 · 16th June 2008, 10:16 AM

thank you, but I think it's still too big for my box.

cal

theAnonymous1 · 16th June 2008, 12:22 PM

This board isn't specifically for a volume control, but it could be configured to power a motorized pot. It's only 5cm x 4.5cm.

http://www.apogeekits.com/ir_receiver.htm

calico88 · 17th June 2008, 02:34 AM

ok, well I need much smaller than that.

thanks

15th June 2008, 12:07 PM	#1
calico88 diyAudio Member Join Date: Mar 2006 Location: sdf	Where can I find Smallest Volume Remote Kit ?? Since my box are tiny, smaller than 5cm X 5 cm for remote volume space, does anyone ever seen the Volume Remote Kit ? (DIY) ?? or buy the ready to use ? as long as small/tiny. I saw threads mith any kits but they are big for my box. thanks cal __________________ be tube

16th June 2008, 04:18 AM	#3
calico88 diyAudio Member Join Date: Mar 2006 Location: sdf	I couldn't find the scandinavian guy who posted the remote... any hint ? cal __________________ be tube

16th June 2008, 04:47 AM	#4
JesseG diyAudio Member Join Date: Jul 2005 Location: Mid coast of British Columbia	Smallest I have ever seen = I have one and it orks great! http://www.diygene.com/servlet/the-415/4-way-Motorized-Remote/Detail __________________ "If we crashed our cars as often as we crashed our computers, we'd all be dead!"

16th June 2008, 05:06 AM	#5
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	This PGA23XX/CS3310 IR controller board is fairly small, but it requires a seperate board with the PGA23XX/CS3310 on it (which could be made even smaller). http://www.tauntek.com/irvc-ir-maste...me-control.htm __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

16th June 2008, 05:55 AM	#6
calico88 diyAudio Member Join Date: Mar 2006 Location: sdf	thank you for the site remote tiny control board. but i have no clue how to connect them together with the additonal board. and i was thinking using it with small motor from cellular vibrator motor to control the potentionmeter. I can build the mechanical gear for the pot. but I have no idea how the electronic part . cal __________________ be tube


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th June 2008, 03:57 AM	#2
Bluto diyAudio Member Join Date: Sep 2007 Location: WI.- near the Dells	Cal - Can't recall dimensions but there is a Scandinavian guy who sells kits right here in forum in sellers area. Bluto

16th June 2008, 09:35 AM	#7
pacificblue diyAudio Member Join Date: May 2008	Here is "the Scandinvian guy" from post #2 http://electronics.dantimax.dk/Kits/...rds/index.html

16th June 2008, 10:16 AM	#8
calico88 diyAudio Member Join Date: Mar 2006 Location: sdf	thank you, but I think it's still too big for my box. cal __________________ be tube

16th June 2008, 12:22 PM	#9
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	This board isn't specifically for a volume control, but it could be configured to power a motorized pot. It's only 5cm x 4.5cm. http://www.apogeekits.com/ir_receiver.htm __________________ "If you don't like funerals don't kick sand in Ninja's face." - Ninja

17th June 2008, 02:34 AM	#10
calico88 diyAudio Member Join Date: Mar 2006 Location: sdf	ok, well I need much smaller than that. thanks __________________ be tube

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Volume control on DVD player remote. Lose resolution at low volume?	Circlotron	Digital Source	2	10th June 2011 07:20 PM
Where to find RF remote stepped attenuator?	Bgt	Analog Line Level	8	13th February 2009 12:53 AM
Remote volume control for existing remote?	theAnonymous1	Parts	7	6th August 2007 08:22 AM
Remote volume - existing remote	Stuey	Chip Amps	16	25th August 2006 11:44 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read