Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

My first LM3886 project (please help urgently!!)
My first LM3886 project (please help urgently!!)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th March 2008, 11:45 AM   #1
Derfla is offline Derfla  Australia
diyAudio Member
 
Join Date: Mar 2008
Default My first LM3886 project (please help urgently!!)

Hi, everyone, I'm new here and I have been reading lots about gainclones and decided to build some of these fantastic amps
I have all the parts ready but I just need some clarfication on some things
my power supply for each channel will be a 100VA square transformer with bridge rectifier and two 4700uf caps across the DC output (voltage is about 28.5v)
all resistors used are 0.5W and the electrolytics are 50VDC, 100nf's are 100V
the heatsink for the LM3886TF chips was taken from an old amp
now here's my circuit (dogbreath.de has been of much help thank you!)
Click the image to open in full size.
I am confused about where all the grounds go, do they all get connected together and to the mains earth? and also where in the circuit does the input signal's 'negative' go? what about the speaker output negative? it would of much help if it was indicated on my schematic (modified from dogbreath.de)
the schematic is correct isn't it? and am I missing anything?

Thanks! =]
Derfla
  Reply With Quote
Old 9th March 2008, 12:08 PM   #2
gainphile is offline gainphile  Australia
diyAudio Member
 
gainphile's Avatar
 
Join Date: Dec 2007
Location: Melbourne the sunny city!
This is my approach for point-to-point wiring GC:

http://www.diyaudio.com/forums/showt...hreadid=118735

Perhaps bit different if you're using PCB as the PCB would have a grounding point already.
__________________
http://gainphile.blogspot.com
  Reply With Quote
Old 9th March 2008, 12:26 PM   #3
peranders is offline peranders  Sweden
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
My first LM3886 project (please help urgently!!)
Before you do anything I recommend you to read these two documents.

http://www.national.com/an/AN/AN-1192.pdf
http://www.national.com/ds.cgi/LM/LM3886.pdf
__________________
/Per-Anders (my first name) or P-A as my friends call me
Group buy: SSR03 Super Regulator Power Supply. Sign up HERE 14 pcb's in interest so far.
  Reply With Quote
Old 9th March 2008, 01:37 PM   #4
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi Derfla,
that's a DC coupled amplifier with no RF filter and no output Thiele network and with wrongly placed decoupling caps and it is liable to burn out your speakers.
__________________
regards Andrew T.
  Reply With Quote
Old 10th March 2008, 10:11 AM   #5
Derfla is offline Derfla  Australia
diyAudio Member
 
Join Date: Mar 2008
could you please explain what you mean andrewT?
and for the mute line i've seen people include a switch there so does is the amp on when the switch is closed?
  Reply With Quote
Old 10th March 2008, 11:17 AM   #6
peranders is offline peranders  Sweden
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
My first LM3886 project (please help urgently!!)
Have you compared the application note and the datasheet how to do a proper connection? Study the typical application and compare it with what you have come up with.
__________________
/Per-Anders (my first name) or P-A as my friends call me
Group buy: SSR03 Super Regulator Power Supply. Sign up HERE 14 pcb's in interest so far.
  Reply With Quote
Old 10th March 2008, 12:11 PM   #7
Derfla is offline Derfla  Australia
diyAudio Member
 
Join Date: Mar 2008
ahh so would these be better instructions to follow
http://dogbreath.de/Chipamps/GainCar...nCardCopy.html
and can I still use the 100nf caps across the electrolytics?
I also have a dual gang 10k potentiometer so can I use this for volume control?

thanks for the help
  Reply With Quote
Old 10th March 2008, 01:28 PM   #8
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
do not put the decoupling caps(100nF) across the electrolytics. Put them direct onto the pins of the chipamp.
I now see an output Zobel, but still no RF filter.
The NFB is DC coupled and the input is AC coupled. Make them both AC coupled.
__________________
regards Andrew T.
  Reply With Quote
Old 14th March 2008, 02:06 PM   #9
Derfla is offline Derfla  Australia
diyAudio Member
 
Join Date: Mar 2008
what do you mean by an RF filter?
and what does NFB mean? and how do I make it AC coupled??
or would carlosFM's schematic be my best bet?
http://www.vikash.info/audio/p2plm3886/
  Reply With Quote
Old 14th March 2008, 07:44 PM   #10
Andy Bartha is offline Andy Bartha  United States
diyAudio Member
 
Join Date: Sep 2004
Location: Oregon
I would recommend CarlosFM's schematic and his power supply. Do you need all that gain? Remember you will be amplifying everything that the input sees. On your schematic you have a bit more than 30dBs of gain.
  Reply With Quote

Reply


My first LM3886 project (please help urgently!!)Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Yamaha NS-1000 Tweeters Wanted Urgently hugomac Multi-Way 33 20th December 2013 06:19 PM
need help in correcting errors urgently weifeng Parts 5 13th February 2006 12:54 AM
Help Needed on ADC Urgently!!! wernchern Analogue Source 0 28th June 2004 03:00 AM


New To Site? Need Help?

All times are GMT. The time now is 12:32 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki