diyAudio (
-   Chip Amps (
-   -   input bass rolloff, tilt and gain circuits? how to design them? (

rhythmdiy 26th October 2007 02:31 AM

input bass rolloff, tilt and gain circuits? how to design them?
Dear friends,

I want to connect these circuits at the input of the chipamp..

I want to build the following circuits... but im not getting the idea how the circuit would be for the following...

input gain in db ( will it be an L-pad attenuator?)
bass roll off
bass tilt
treble roll off
treble tilt....

I never heard about these before...

Please guide me.....


Paswa 26th October 2007 12:19 PM

please submit the full pdf file

rhythmdiy 26th October 2007 06:10 PM

KSTR 27th October 2007 01:31 AM

Level is the channel level (e.g. woofer channel) in the Genelec (this could be mimicked with a shelving filter with steep slopes or a derived filter), tilt seems to be a regular shelf and roll-off seems to be a an adjustable bell filter. These are very application specific for that product, its intended use and clients.

The same functions could be handled with any reasonable graphic or parametric EQ.

Among MANY other excellents projects, a graphic EQ can be found here

- Klaus

rhythmdiy 27th October 2007 02:20 AM

Hi KSTR the links what you gave are really nice. But I couldnt find bell filters. At the same time Im using 24db Linkwitz crossover so I would like to implement these roll off, tilt and the gain circuits just with the RC networks... is it possible just with the RC networks?

rhythmdiy 27th October 2007 03:27 AM

one more thing is that in shelf filters if I change any of the value then it changes the frequency points.. but I want to have control of gain just like what Genelec has.... can you please help me out...

All times are GMT. The time now is 01:52 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2