Lm3886 Pcb

Azbests · 2nd October 2007, 03:15 PM

hi people! first of all i have a bad English so don't yell at me if i make mistakes

so.. i looked through the forum and couldn't find any good PCB schemes for LM3886,
only one i liked is BrianGT's one but i didn't understand how it works..
and yes i can make PCB at home so don't bother me with ready PCB offers..

thanks for reading, Azbests!

AndrewT · 3rd October 2007, 11:26 AM

search harder.
There are many PCBs

Minion · 3rd October 2007, 06:43 PM

The LM3886 uses such a simple Curcuit that you don"t really need much skill comeing up with a PCB.......

here"s a very basic one I drew up in about 10 minutes....

the PCB size is 2.9 in x 1.7 in.....

Cheers

CJ900RR · 4th October 2007, 05:53 AM

That package for the LM3886 is wrong. the upper rows of holes should be at the downside and vice verca.

2nd October 2007, 03:15 PM	#1
Azbests diyAudio Member Join Date: Oct 2007	Lm3886 Pcb hi people! first of all i have a bad English so don't yell at me if i make mistakes so.. i looked through the forum and couldn't find any good PCB schemes for LM3886, only one i liked is BrianGT's one but i didn't understand how it works.. and yes i can make PCB at home so don't bother me with ready PCB offers.. thanks for reading, Azbests!

3rd October 2007, 11:26 AM	#2
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	search harder. There are many PCBs __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First LM3886 GC	samsagaz	Chip Amps	49	29th June 2008 07:55 PM
Psu Lm3886	Mayday	Chip Amps	29	29th April 2007 06:10 PM
Lm3886 Bpa	Tombson	Chip Amps	99	21st August 2006 12:04 PM
Are two separate lm3886 = 2*lm3886 in parallel or bridge mode	rs1026	Chip Amps	11	21st October 2004 10:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd October 2007, 06:43 PM	#3
Minion diyAudio Member Join Date: May 2006	The LM3886 uses such a simple Curcuit that you don"t really need much skill comeing up with a PCB....... here"s a very basic one I drew up in about 10 minutes.... the PCB size is 2.9 in x 1.7 in..... Cheers

4th October 2007, 05:53 AM	#4
CJ900RR diyAudio Member Join Date: Jan 2006	That package for the LM3886 is wrong. the upper rows of holes should be at the downside and vice verca.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)