Hi all,
I've just put together a basic cmoy headphone amp with an opa2134. My problem has come from the power supply where the voltage divider is not, well, dividing equally. I have two 4k7 resistors in series with 100uF caps in parallel with those. The voltage readings from an 18V (bench lab) supply reads approx +16V across the first resistor and -2V across thge other. Any help would be greatly appreciated!
Thanks!
I've just put together a basic cmoy headphone amp with an opa2134. My problem has come from the power supply where the voltage divider is not, well, dividing equally. I have two 4k7 resistors in series with 100uF caps in parallel with those. The voltage readings from an 18V (bench lab) supply reads approx +16V across the first resistor and -2V across thge other. Any help would be greatly appreciated!
Thanks!
Hrrrrm so I forgot to cut the tracks in between the parallel pins on the opamp! Very embarrassing!!! How do I check that my opa2134's are okay? The voltage divider seems to still be unbalanced (-8V & 11V)
Oh, and the input is the same as the output - Is the amp now a fancy looking short on a board?
Oh, and the input is the same as the output - Is the amp now a fancy looking short on a board?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.