|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Chip Amps Amplifiers based on integrated circuits |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th May 2007, 08:22 AM
|
#1 |
|
diyAudio Member
Join Date: May 2007
|
EMI filter for gainclone PSU?
I salvaged a 03GEEG3E EMI filter made by Delta Electronics from a CRT. Is there any point in using this in front of a transformer for a gainclone PSU?
Datasheet: http://www.delta.com.tw/product/cp/emi/new_prod/GE.pdf |
|
|
24th May 2007, 01:00 PM
|
#3 |
|
diyAudio Moderator Emeritus
Join Date: Jan 2005
Location: Pennsylvania
|
What is the current rating of the EMI module? I would try it with and without to determine which setup sounds better. If you have other noisy electronics connected to the same outlet or on the same power strip it may be beneficial to use it.
__________________
Brian |
|
|
|
24th May 2007, 09:51 PM
|
#5 |
|
diyAudio Moderator Emeritus
Join Date: Jan 2005
Location: Pennsylvania
|
A 3A rating should be enough unless you plan on using it in a pretty powerful amp. If you don't like how it sounds you can easily replace it with an IEC jack that doesn't have the EMI filter.
__________________
Brian |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gainclone, mains filter, and PSU inductance | mr.duck | Chip Amps | 1 | 30th March 2007 04:38 PM |
| Line Filter for Gainclone | Bassterror | Chip Amps | 2 | 1st October 2006 11:23 AM |
| Whats wrong with large filter caps for Gainclone? | Mesh | Chip Amps | 142 | 17th October 2003 11:25 PM |
| Gainclone Low Pass Filter | Matttcattt | Chip Amps | 25 | 1st August 2003 11:46 PM |
| New To Site? | Need Help? |
