Xtant X1001

Bgun · 14th March 2007, 01:19 AM

Was wondering if anyone out there had this amp and could take a picture of a certain part of the board for me. The amp I have may be missing parts near an op-amp and the layout numbers are unreadable on this board The op-amp in question is the one nearest the opto-couplers. I can upload a picture of the area for reference if needed.

MadMutt · 14th March 2007, 03:53 AM

Have a look at 'ampguts' site.
he might have a pic you can use.

Bgun · 14th March 2007, 03:57 AM

I already did and it is of no help. Thanks though.

valterdaw · 15th March 2007, 06:34 PM

LMK what part of board you need to see

valterdaw · 15th March 2007, 06:37 PM

Quote:

Originally posted by valterdaw
LMK what part of board you need to see

Ups, nevermind... just checked on ampguts... I have an older version of this amp

!v@n · 3rd November 2008, 12:12 PM

I need a close up picture of the board area between the remote power input and the speaker outputs. Mine has a few broken chips and I need to know their part numbers so I can replace them

Perry Babin · 3rd November 2008, 02:55 PM

http://www.bcae1.com/temp/IMG_4124.JPG

http://www.bcae1.com/temp/IMG_4126.JPG

http://www.bcae1.com/temp/IMG_4128.JPG

!v@n · 3rd November 2008, 08:03 PM

PERFECT! thank you so much. Now I can go to the electronics store and buy what I need to replace them.

!v@n · 4th November 2008, 03:51 AM

where can I get the parts from? my local electronics supply store did not have what I needed

Perry Babin · 4th November 2008, 04:00 AM

Mouser, Digi-Key...

Which parts do you need?

14th March 2007, 01:19 AM	#1
Bgun diyAudio Member Join Date: Sep 2006	Xtant X1001 Was wondering if anyone out there had this amp and could take a picture of a certain part of the board for me. The amp I have may be missing parts near an op-amp and the layout numbers are unreadable on this board The op-amp in question is the one nearest the opto-couplers. I can upload a picture of the area for reference if needed.

3rd November 2008, 02:55 PM	#7
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	http://www.bcae1.com/temp/IMG_4124.JPG http://www.bcae1.com/temp/IMG_4126.JPG http://www.bcae1.com/temp/IMG_4128.JPG __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

4th November 2008, 04:00 AM	#10
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	Mouser, Digi-Key... Which parts do you need? __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
xtant 604 x	mike49504	Car Audio	8	29th November 2008 08:00 AM
Xtant X1001	shagone	Car Audio	11	15th April 2008 12:28 AM
xtant 3300c	nath339	Car Audio	4	30th March 2008 02:50 AM
FST ~~ XTANT 4.4 -- 4 channel -- like new ~~	Livin	Swap Meet	7	5th March 2008 10:23 PM
Fs:Xtant X1001, Lots Of Power!	shallowfu	Swap Meet	0	17th September 2006 08:01 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th March 2007, 03:53 AM	#2
MadMutt diyAudio Member Join Date: Nov 2006	Have a look at 'ampguts' site. he might have a pic you can use.

14th March 2007, 03:57 AM	#3
Bgun diyAudio Member Join Date: Sep 2006	I already did and it is of no help. Thanks though.

15th March 2007, 06:34 PM	#4
valterdaw diyAudio Member Join Date: Jun 2006	LMK what part of board you need to see

3rd November 2008, 12:12 PM	#6
!v@n diyAudio Member Join Date: Nov 2008	I need a close up picture of the board area between the remote power input and the speaker outputs. Mine has a few broken chips and I need to know their part numbers so I can replace them

3rd November 2008, 08:03 PM	#8
!v@n diyAudio Member Join Date: Nov 2008	PERFECT! thank you so much. Now I can go to the electronics store and buy what I need to replace them.

4th November 2008, 03:51 AM	#9
!v@n diyAudio Member Join Date: Nov 2008	where can I get the parts from? my local electronics supply store did not have what I needed

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read