The 0 or 180 Phase switch is used for the purpose of reversing the signal phase of the bass signal for rearward firing woofers. It also "Might" be used to bridge two amps together like my Early Rockford 250M's.
I am not sure about your amp so don't go bridging on this posts info alone, you might damage your amp severely.
I am not sure about your amp so don't go bridging on this posts info alone, you might damage your amp severely.
Ah, thanks for the info man but I was more referring to the fact that the amp does not clearly mark which position of the button is 0, and which is 180, I just want to make sure I have it at 0 lol. That was just one example too, some of the other dials like the crossover freq knob dont have Hz markings on them to tell you what you are setting the crossover to, something else the manual would probably help me figure out specifically. thanks tho
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.