where to get replacement terminal screws for car amps?

spooney · 29th December 2006, 04:34 AM

I have a couple amps that are missing a few terminal screws.does anybody know a good place to find some replacements?

Perry Babin · 29th December 2006, 07:30 AM

If you want the screws with the plate washer, try ebay (search for amp screws) or http://www.amplifierscrews.com/index.htm.

The metric screw section of any hardware store should have screws that fit. You'll have to use a spade or ring terminal.

:xrow: · 31st December 2006, 02:16 AM

If you're talking about the set terminals that you tighten on to the wire, here is a link to a place that sells them. I can't link straight to them so you'll have to scroll down to the section called Fastening and Sealing. Under that section, click on Set Screws.

http://www.mcmaster.com/

Amp Screws · 31st March 2008, 06:37 AM

http://www.AmplifierScrews.com

MikeHunt79 · 31st March 2008, 02:06 PM

Also look for Grub screws - My RF amp uses M4 ones FWIW.

29th December 2006, 04:34 AM	#1
spooney diyAudio Member Join Date: Dec 2006	where to get replacement terminal screws for car amps? I have a couple amps that are missing a few terminal screws.does anybody know a good place to find some replacements?

29th December 2006, 07:30 AM	#2
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	If you want the screws with the plate washer, try ebay (search for amp screws) or http://www.amplifierscrews.com/index.htm. The metric screw section of any hardware store should have screws that fit. You'll have to use a spade or ring terminal. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

31st March 2008, 06:37 AM	#4
Amp Screws diyAudio Member Join Date: Mar 2008	Where to buy car amplifier screws http://www.AmplifierScrews.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PSU capacitor replacement for Marantz MA-500 mono amps	SimontY	Solid State	6	6th May 2008 08:19 PM
3 terminal regulator with 3 terminal shunt reference	BWRX	Power Supplies	10	12th April 2008 03:49 PM
Rockford Fosgate Terminal Screws	spooney	Car Audio	1	20th October 2007 05:29 PM
Replacement for screws?	GeniX	Multi-Way	7	20th October 2003 09:24 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st December 2006, 02:16 AM	#3
:xrow: diyAudio Member Join Date: Feb 2005 Location: Arkansas	If you're talking about the set terminals that you tighten on to the wire, here is a link to a place that sells them. I can't link straight to them so you'll have to scroll down to the section called Fastening and Sealing. Under that section, click on Set Screws. http://www.mcmaster.com/

31st March 2008, 02:06 PM	#5
MikeHunt79 diyAudio Member Join Date: Aug 2003 Location: Bristol, UK	Also look for Grub screws - My RF amp uses M4 ones FWIW.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read