Perry Babin ORION 225

[shallowfu]

Perry Babin, Can you help me?I need a picture of a 2nd gen 225 orion.I removed mosfets,ref,outputs a long while ago and forgot where they go.I have has this board laying around for awhile.A picture or just placement,Thanks again!

 

[Perry Babin]

http://www.bcot1.com/canons3macro/225/IMG_4062b.jpg
http://www.bcot1.com/canons3macro/225/IMG_4063b.jpg
http://www.bcot1.com/canons3macro/225/IMG_4064b.jpg
http://www.bcot1.com/canons3macro/225/IMG_4065b.jpg

 

[shallowfu]

Thanks,I had it laying around for awhile and it was stuck in clipped.I replaced everything but, clipped told me maybe replace the op's because thats the only thing i haven't changed.I'm going to put evrything back on and see what happens.Do you have a lj 500.1 insides pictures?Amp guts didn't help.

 

[Perry Babin]

What section?

The smd parts require tight shots to be usable.

 

[shallowfu]

An externally hosted image should be here but it was not working when we last tested it.

 

[Perry Babin]

http://www.bcot1.com/canons3macro/jl/IMG_4091b.jpg
http://www.bcot1.com/canons3macro/jl/IMG_4092b.jpg

Let me know if you need any others or if these missed the actual components you need.

 

[shallowfu]

Those were perfect and i picked the board up in ebay.It was all there but, those parts.It looks worth making it a diy project or if i can get a sink.What do you think of it?

 

[Perry Babin]

I think you should get it working before you spend any time looking for a sink.

They're generally easy to repair (because the problems are generally simple). If the board isn't damaged and the output inductor isn't damaged, you should be able to get it going.

 

[shallowfu]

I have stacks of many brands of boards over the years bought on ebay and other but, the outputs were bad only and i think someone just parted it a little.Thanks to you i will get those parts next time a put a order in and see what happens.If it doesn't work it doesn't matter it was bought for parts anyways.