Eyebrid 4Y80 with mass eror - Page 2 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 24th July 2006, 06:36 AM   #11
Netlist is offline Netlist  Belgium
diyAudio Moderator Emeritus
 
Netlist's Avatar
 
Join Date: Jan 2003
Jörg,
I believe Perry is far more experienced in the car audio field and I'm sure he gave valuable information.
Thanks for the schematic, I had a quick look and found on page 5 in the lower left corner the resistor/cap network connecting input ground to supply ground. (R77 // C14). You might want to check these parts as well.

/Hugo
  Reply With Quote
Old 25th July 2006, 04:33 PM   #12
JoergST is offline JoergST  Germany
diyAudio Member
 
Join Date: Jul 2006
Send a message via ICQ to JoergST
Thumbs up IT WORKS

Hello, the amplifier is still working. I have found the mistake. It was a narrow conductive strip. I send a photo from this defect. It was 5 cm away from the cinch terminal. So I solder a new conductive strip.

Special Thanks to Perry Babin and Netlis for their help

Here is the picture

http://img116.imageshack.us/img116/1...ensmallsg0.jpg

Regards Jörg
  Reply With Quote
Old 25th July 2006, 04:45 PM   #13
Netlist is offline Netlist  Belgium
diyAudio Moderator Emeritus
 
Netlist's Avatar
 
Join Date: Jan 2003
Very nice find. Enjoy your amp.

/Hugo
  Reply With Quote
Old 25th July 2006, 04:47 PM   #14
JoergST is offline JoergST  Germany
diyAudio Member
 
Join Date: Jul 2006
Send a message via ICQ to JoergST
Default It Works

I think I will sell them. I have bought an emphaser 5 channel amplifier.

Regards Jörg
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Effective mass?? dario54 Analogue Source 6 6th August 2008 07:40 PM
mass loading aznboi3644 Subwoofers 1 13th March 2008 11:47 PM
Hello, please need Connection Diagram Eyebrid 4Y80 JoergST Car Audio 1 18th July 2006 04:34 PM
Adding mass to PR.... hofffam Subwoofers 1 7th January 2005 12:01 AM
effective mass peterr Analogue Source 9 5th April 2002 02:52 PM


New To Site? Need Help?

All times are GMT. The time now is 10:45 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2